The sensor requires very little maintenance, with no special tools or training required. Calibration can be carried out against either a wet turbidity standard or using the dry calibration reference cell that is supplied with every sensor. The reference cell provide an extremely easy, repeatable method of checking the performance of the sensor without the cost and inherent errors associated with chemical standards
| Physical | |
|---|---|
| Dimensions (hxwxd) | 440 x 320 x 200 mm |
| Weight | 4.5 kg (inc 5 metres of cable) |
| Protection Class | IP65 |
| Enclosure Material | Black Acetal Co-Polymer |
| Cable Entries | Integral Cable Gland |
| Wetted Parts | Black Acetal, 316 Stainless Steel, Glass, Nitrile |
| Cable Type | 4 core, 2 Twisted Pair, 5 mm O/D Polyurethane Coated |
| Cable Length | 5 metres standard, 100 metres maximum |
| Service Requirement | Wiper blade replacement as required |
| Environmental Data | |
| Operating Temperature | 0 to 50ºC |
| Interface to Monitor | |
| Power Supply | 12 VDC from Monitor |
| Sensor Output |
ModTechw², RS485 |
| Measurement | |
|---|---|
| Low Range | 0-30 FTU |
| Accuracy | Better than ±2% of measured value or ±0.02 FTU whichever is greater |
| Limit of Detection | 0.02 FTU |
| Minimum Operating Range | 0 - 3 FTU |
| High Range | 0-500 FTU |
| Accuracy | ±2% of measured value or ±0.1 FTU whichever is greater |
| Limit of Detection | 1 FTU |
| Minimum Operating Range | 0 - 50 FTU |
| Display Resolution |
0.0001 NTU from 0.0000 to 9.9999 NTU 0.001 NTU from 10.000 to 49.999 NTU 0.01 NTU from 50.00 to 500.00 NTU |
| Measurement Principle | 90° Light Scatter, ISO 7027 Compliant |
| Wavelength | 860 nm |
| Pressure Rating | 2 Bar/30 psi |
| Flowrate | 0.5 l/min to 5 l/min |
| It has been asusmed that 1 FTU = 1 NTU for the purposes of these range statements | |
Malaysia
