Description
PE-GRP 200/400 series is a micro processor programmable user friendly control panel with a digital ammeter, voltmeter and a countdown timer displayed on the front panel. Count down timer is pre-set for 30 seconds upon two (2) activated zone. Timer can be program to required specification. Built-in power pack with an intelligent charger which allow to charge up a set of complete flat 24 volts battery and automatically cuts off charging once battery fully charge.
|
SPECIFICATION |
|
No. of Zones |
Model No. |
Part No. |
Size (mm) (W x D x H) |
|
Indoor |
Outdoor |
|
2 |
PE-GRP 200i / PE-GRP 200s |
FAP-02ZCP-N |
430 x 370 x 170 |
430 x 380 x 170 |
|
4 |
PE-GRP 400i PE-GRP 400s |
FAP-04ZCP-N |
550 x 390 x 170 |
550 x 400 x 170 |
|
TECHNICAL DATA |
|
Power Supply Input |
240V AC 50Hz/60Hz |
|
Operating System |
24V DC |
|
Operating Battery |
18-27.6V DC |
|
Battery Cut Off |
18V |
|
Intelligent Charger (S1) |
0.67A – 1.3A @ 30% |
|
Intelligent Charger (S5) |
1.2A – 1.8A @ 100% |
|
End of Line |
8K2 Ohms |
|
Auxiliary Output |
24V, 2 Amp |
|
Alarm Signal |
N/O Contact |
|
Gas Discharged Signal |
N/O Contact |
|
STANDBY MODE |
|
Master |
75mA |
|
Per zone (with Detectors) |
5mA |
|
Flashing Lights (Green LED) |
75mA |
|
ALARM MODE |
|
Master |
140mA |
|
Per Trigger Zone |
70mA |
|
Output Devices |
200mA |
|
Flashing Lights (Red LED) |
75mA |
|
Per Bell |
30mA |
|
More detail about GREEN SIMEX ENGINEERING SDN BHD
