COMBUSTIBLE GAS DETECTOR WITH FLEX GOOSENECK - (GSM100)

COMBUSTIBLE GAS DETECTOR WITH FLEX GOOSENECK - (GSM100)

Category: Combustible Gas Detectors Out of stock
For more information, visit our official website at lelab.com.my

Description

The Triplett Model GSM100 Combustible Gas Detector identifies the presence of combustible gases such as Methane, Hydrogen, Carbon Monoxide, Propane, Ethylene, Ethane, Hexane, Benzene, Iso-Butane, Ethanol, Acetaldehyde, Formaldehyde, Toluene, P-Xylene, Ammonia, and Hydrogen Sulfide. It will also detect common mixtures that would include or emit more than one of these gases: Natural Gas (typically consists of a high percentage of methane and smaller percentages of propane and other gases), Paint Thinners, Industrial Solvents, Dry Cleaning Fluids, and Gasoline. The GSM100 has a 16'' (406mm) adjustable gooseneck probe with replaceable heated sensor, TRI Mode Detection (visual, audible and vibration alerts), five red LEDs that display the threshold levels of a measurement with two (Low and High) sensitivity settings, plus audible tick (85dB) and vibration alert rates that increase as the detected gas level gets stronger. It has an auto zero calibration in fresh air, a Hold button that freezes the measurement, and an Auto power off with disable to conserve battery life.

Features:
Specifications:

  GSM100
Range 0 to 10,000ppm (Methane)
Sensitivity Level (High) 100/400/700/1000/>1000ppm
Sensitivity Level (Low) 1000/4000/7000/10000/>10000ppm
Sensitivity <50ppm (Methane)
Response Time <2 seconds
Visual Alert 5 Red LEDs
Audible Alert (85dB) Ticking rate increases with gas level
Vibration Alert Vibration rate increases with gas level
Warm-up Time 50 seconds max.
Power Rechargeable Li-Po Battery
Dimensions 8.7 x 2.4 x 1.6'' (220 x 62 x 40mm)
Weight 1lbs (480g)

More detail about LELab Sdn Bhd
LELab Sdn Bhd
LELab Sdn Bhd Laboratory Equipment Malaysia, Titrator & Sonicator Cleaning Bath | LELab Sdn Bhd
Contact Us flagMalaysia