ASG Plaster Joint Compound (Ready-Mix) 5kg
Application
- Can only be apply on to dry surfaces.
- Apply thoroughly and allow each coat to dry before applying the next coat.
- Keep air to minimum, joint compound surface temperature of 23-30°C within working area until joints are completely dry.
Direction to Use
- Fill the joints with compound using 6'' wide blade knife. Embed the tape and press in with knife.
- Remove excess compound then apply evenly a thin coat over the tape.
- For best result, spread smooth with long, parallel strokes.
- Also, apply compound to cover embedded fasteners
- Apply second coat, smoothing out 2'' beyond first coat and allow to dry (use 8'' blade knife of joints)
- Apply final thin finish coat and let dry. (Use 10'' blade knife for joints)
- Sanding is not allowed. If requires, use very fine sandpaper of grit 160.
- All tools to be washed with clean water and wipe dry before storing.
Storage
- Store Joint Compound at room temperature in a cool dry location
- Keep away from direct exposure to sunlight
- Protect from Freezing. Re-seal the container after use
Malaysia
