1) Aasta identical tyres onto the same axle-same size, structure, brand, and design. Follow the vehicle manufacturer's recommendations as to replacing 2 or 4 tyres at the same time. Always respect the rolling circumference rago when fitting tyres to a 4WD.
2) A vehicle must not be fitted with tyres with a Load Index lower than that listed on the vehicle's Tyre Placard Respect the Speed Code as well
3) Use the recommended minimum cold tyre pressure as listed on the vehicle's Tyre Placard. Failure to use the correct pressure may cause injury to the tyre
4) Tyre mounting should only be done by specialized professionals using the correct equipment. Never exceed 3.5 bar (50psi) to seat the tyres beads. Always use a high-quality wax bead lubricant without the addition of water,
