SIMCO – Work Surface Tester ST-4: Top Choice in Melaka, Malaysia Carlssoon Technologies Sdn Bhd

Description

SIMCO – Work Surface Tester ST-4
Brand: SIMCO
Model: ST-4

Description:

This device makes measuring surface resistance very simple
The device's portability makes it easy to carry anywhere on-site.
Built-in auto off-timer
The device comes with a rechargeable battery.
Designed to measure the resistance of various materials and products from 103 to 1013 measurement range.
Ideal for the conductive mat, conductive floor, conductive bag, anti-static products, etc.
Comply with weight-contact area measuring method (optional)

Surface Resistivity	10³ ~ 10¹³ (Ω/sq. or Ω)
Mode	① Standard Mode (Ohm per square, Surface Resistivity) ② Mat surface – Mat resistance measurement Mode (Ohms, Resistivity to Ground) (w/ cable) ③ IEC Standard measurement Mode follow the IEC standard probe (surface + weight)
LCD Display	Exponent display (one digit beyond the decimal point) Remaining measurement time by bar-graph indicator Remaining battery life
LED Display	① TEST Green LED indicator: Standard Mode (Ohm per square, Surface Resistivity) Red LED indicator: Mat-Ground resistance measurement Mode (Ohms, Resistivity to Ground) and IEC standard measurement Mode ② Measurement voltage (10V, 100V) ③CHARGE Red LED indicator: in process of charging
Measurement Time	10sec, 30sec, 60sec
Range	Can be set up the max and min of measurement value (by 0.5 exponent)
Accuracy	±0.5 decade (ex.108.5 ±0.5)
Measurement voltage	Automatically adjust/ chamge ① Cube of 3 to 6: 10V, 10mA MAX ② Cube of 6 to 13: 100V, 1mA MAX
Source	Inside battery
External outlet	① External probe connector ② AC adaptor connector (battery charging USB mini type)
Measurement are	50mm (probe length) x 50mm (probe distance)(in measurement)
Probe material	Special conductive rubber (volume resistivity 0.02 Ω.cm max.)
Environment	15 ℃ ~ 25℃, under 60%R.H.
Dimension	114(W) X 78(D) X 69(H) max.(mm)
Case	Stainless Steel
Weight	Body 700g