CEDAR – Torque Tester NDI-80CN & NDI-800CN: Top Choice in Melaka, Malaysia Carlssoon Technologies Sdn Bhd

Description

CEDAR – Torque Tester
Brand: Cedar
Model: NDI-80CN & NDI-800CN

Description:
Visible display due to colourization & tilt function Easier operation with dedicated software enables more sophisticated management. Due to ''OW Joint'', able to measures effectively without rewinding.

Torque Tester:

Measure the time: Date and time and other information are allocated to memory data. When something goes wrong, you can quickly check past data.
Look at pass/fail: Tilt color liquid crystal is used for the display board. Pass / fail result and various information are displayed in an easy-to-understand manner.
Operate with a PC: By connecting with the personal computer, all the control of the main body can be done with the personal computer. Easy setting of numerical values and data can be done easily.
Connect with PLC: RS232C output is also equipped as standard. Since I / F specification of communication is also disclosed, you can control exactly from PLC as you wish.
Work with dry batteries: Either external power source or dry battery can be used. Lifetime replacement of troublesome rechargeable batteries are unnecessary.

Specifications:

Model

NDI-80CN

NDI-800CN

Range

0.020 ~ 8.160 kgf cm

0.20 ~ 81.60 kgf cm

0.018 ~ 7.080 lbf in

0.18 ~ 70.80 lbf in

2.0 ~ 800.0 mN m

0.020 ~ 8.000 N m

Unit

kgf cm / lbf in / mN m

kgf cm / lbf in / N m

Accuracy

±0.5%
(If the value is 499 digit or less, the accuracy ±3 digit.)

Sampling rate

1000 data / 1 second

Measurement mode

Symbol		Contents
Peak hold	PP	Hold the inputted maximum value.
Peak down	PD	Hold the inputted first peak value.
Real time output	C	Use at the measurement of torque wave. Sampling rate is 250 data / 1 second.
Track	TR	Use at the calibration mainly. Display the load torque value.

Memory capacity

400 data

Clock

Store the measurement date.

Power

AC adaptor (12V) / AA battery

Socket size

□ 20mm/ □9.5mm

Accessories

(one pieces each)

(measurement joint) OW-025 / OW-10

(measurement joint) OW-20 / OW-60

Cube with screw holes of M2.6, M3, M4, M5 and M6 (size 20×20×20mm)

AC adaptor input : AC100~240V (50/60Hz) output : DC12V)

USB cable (mini B type)

AA size cell×4

Result of calibration, Certification on calibration, Traceability system figure

More detail about Carlssoon Technologies Sdn Bhd