MAHR – Inductive Probe Milimar P1300 M: Top Choice in Melaka, Malaysia Carlssoon Technologies Sdn Bhd

Description

MAHR – Inductive Probe Milimar P1300 M
Brand: Mahr
Model: P1300M

Connection jack for an evaluation instrument
Connecting plug for the probe
Socket
Screw sealing plug SW 4.6
Hose connector for compressed air (external diameter 3 mm)
Mounting shank
Locking nut
Sealing bellows
Contact point 901 H
Preferred clamping area

Technical Data:

Order no.	4400180	4400190	4400181	4400191
Product type	P1300 MA	P1300 TA	P1300 MB	P1300 TB
Measuring range	± 2.0 mm / *± 0.079“*
Distance of lower stop ¹⁾	- 2.2 . . . 0 mm / *- 0.09 . . . 0“*
Distance of lower stop ¹⁾	+ 2.2 . . . 4.4 mm / *+ 0.09 . . . 0.173“*
Lifter/Retraction	Vacuum Lifter (Standard option)		Compressed Air Retraction (max. 1 bar)
Measuring force at electrical zero point	0.75 N / ± 0.15 N²⁾		depending upon air pressure
Increase in measuring force	0.3 N / mm		-
Sensitivity deviation	0.3 %
Repeatability fw	0.1 μm / *4 μin*
Hysteresis fu	0.5 μm / *20 μin*
Linearity deviation with revised sensitivity
within range ± 0.5 mm	0.4 μm / *16 μin*	1.0 μm / *40 μin*	0.4 μm / *16 μin*	1.0 μm / *40 μin*
within range ± 1.0 mm	1.5 μm / *60 μin*	3.0 μm / *120 μin*	1.5 μm / *60 μin*	3.0 μm / *120 μin*
within range ± 2.0 mm	3.0 μm / *120 μin*	not specified	3.0 μm / *120 μin*	not specified
Protection class according to IEC 60529	IP64
Length of cable	2.5 m / 8 ft (detachable)
Compatibility - Half Bridge	Mahr	Tesa	Mahr	Tesa

1) Relative to the electrical zero point. Adjustable; lower and upper stops are simultaneously adjusted
2) Measuring force springs are interchangeable, following measuring force springs are available (0.25; 0.5; 1; 1.25; 1.5 N)

More detail about Carlssoon Technologies Sdn Bhd