MITUTOYO - ABSOLUTE Digimatic Caliper: Top Choice in Melaka, Malaysia Carlssoon Technologies Sdn Bhd

Description

MITUTOYO - ABSOLUTE Digimatic Caliper
Brand: Mitutoyo
Model: Series 500

Features:

Large and clear LCD readout.
The ZERO/ABS key allows the display to be zero-set at any slider position along the scale for incremental comparison measurements. This switch also will allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
Data Hold Unit (959143) is optional.
Carbide-tipped jaw-type calipers are also available.
Thumb roller included only on calipers up to and including 12” or 300mm.
Supplied in a fitted plastic case. Except 40” / 1000mm supplied in a wooden case.

Specifications:
Metric

Range	Order No.	Accuracy	Resolution	Remarks
0 - 100mm	500-150-30	±0.02mm	0.01mm	ø1.9mm rod depth bar
0 - 150mm	500-151-30	±0.02mm	0.01mm	—
0 - 150mm	500-154-30	±0.02mm	0.01mm	Carbide-tipped jaws for OD measurement
0 - 150mm	500-155-30	±0.02mm	0.01mm	Carbide-tipped jaws for OD & ID measurement
0 - 150mm	500-158-30	±0.02mm	0.01mm	ø1.9mm rod depth bar
0 - 200mm	500-152-30	±0.02mm	0.01mm	—
0 - 200mm	500-156-30	±0.02mm	0.01mm	Carbide-tipped jaws for OD measurement
0 - 200mm	500-157-30	±0.02mm	0.01mm	Carbide-tipped jaws for OD & ID measurement
0 - 300mm	500-153	±0.03mm	0.01mm	—
0 - 450mm	500-500-10	±0.05mm	0.01mm	Without Thumb Roller
0 - 600mm	500-501-10	±0.05mm	0.01mm	Without Thumb Roller
0 - 1000mm	500-502-10	±0.07mm	0.01mm	Without Thumb Roller

Inch/ Metric

Range	Order No.	Accuracy	Resolution	Remarks
0 - 4'' / 0 - 100mm	500-170-30	±.001”	.0005” / 0.01mm	.075'' rod depth bar
0 - 4'' / 0 - 100mm	500-195-30*	±.001”	.0005” / 0.01mm	.075'' rod depth bar
0 - 6'' / 0 - 150mm	500-171-30	±.001”	.0005” / 0.01mm	—
0 - 6'' / 0 - 150mm	500-174-30	±.001”	.0005” / 0.01mm	Carbide-tipped jaws for OD measurement
0 - 6'' / 0 - 150mm	500-175-30	±.001”	.0005” / 0.01mm	Carbide-tipped jaws for OD & ID measurement
0 - 6'' / 0 - 150mm	500-178-30	±.001”	.0005” / 0.01mm	.075'' rod depth bar
0 - 6'' / 0 - 150mm	500-196-30*	±.001”	.0005” / 0.01mm	—
0 - 6'' / 0 - 150mm	500-159-30*	±.001”	.0005” / 0.01mm	Carbide-tipped jaws for OD measurement
0 - 6'' / 0 - 150mm	500-160-30*	±.001”	.0005” / 0.01mm	Carbide-tipped jaws for OD & ID measurement
0 - 8'' / 0 - 200mm	500-172-30	±.001”	.0005” / 0.01mm	—
0 - 8'' / 0 - 200mm	500-176-30	±.001”	.0005” / 0.01mm	Carbide-tipped jaws for OD measurement
0 - 8'' / 0 - 200mm	500-177-30	±.001”	.0005” / 0.01mm	Carbide-tipped jaws for OD & ID measurement
0 - 8'' / 0 - 200mm	500-197-30*	±.001”	.0005” / 0.01mm	—
0 - 8'' / 0 - 200mm	500-163-30*	±.001”	.0005” / 0.01mm	Carbide-tipped jaws for OD measurement
0 - 8'' / 0 - 200mm	500-164-30*	±.001”	.0005” / 0.01mm	Carbide-tipped jaws for OD & ID measurement
0 - 12'' / 0 - 300mm	500-173	±.0015”	.0005” / 0.01mm	—
0 - 12'' / 0 - 300mm	500-167	±.0015”	.0005” / 0.01mm	Carbide-tipped jaws for OD measurement
0 - 12'' / 0 - 300mm	500-168	±.0015”	.0005” / 0.01mm	Carbide-tipped jaws for OD & ID measurement
0 - 12'' / 0 - 300mm	500-193*	±.0015”	.0005” / 0.01mm	—
0 - 12'' / 0 - 300mm	500-165*	±.0015”	.0005” / 0.01mm	Carbide-tipped jaws for OD measurement
0 - 12'' / 0 - 300mm	500-166*	±.0015”	.0005” / 0.01mm	Carbide-tipped jaws for OD & ID measurement
0 - 18'' / 0 - 450mm	500-505-10	±.002”	.0005” / 0.01mm	Without Thumb Roller
0 - 24'' / 0 - 600mm	500-506-10	±.002”	.0005” / 0.01mm	Without Thumb Roller
0 - 40'' / 0 - 1000mm	500-507-10	±.003”	.0005” / 0.01mm	Without Thumb Roller

Dimensions and Mass:

More detail about Carlssoon Technologies Sdn Bhd