HONDA - Ultrasonic Cutter ZO-91: Top Choice in Melaka, Malaysia Carlssoon Technologies Sdn Bhd

Description

HONDA- Ultrasonic Cutter
Brand: Honda-Japan
Model: ZO-91

Powerful handy cutting tool with output power control

Cutting with ultrasonic vibration
When ultrasonic vibration is applied to a blade, the friction between the blade and the workpiece is reduced. As a result, less physical force needs to be applied to the cutter or knife when cutting the workpiece normally.
*If the blade is not capable of cutting the material by itself (without ultrasonic vibration), it will not be able to cut the material when ultrasonic vibration is applied.

<< note >>
* It does not reinforce the hardness of blades. The blade cannot cut the material that is harder than itself.
* Ultrasonic horn and ceramics heats up by long time use (about 10 minutes).
Protection circuit will stop the operation. Please rest the unit until it cools down.
* Pressure force to the blade is up to 3 kg. Too much pressure cause dislocation of blade, overheat or malfunction.
* Thermo protection may work shorter time.
When the unit stops operation with too much heat, please wait until it cools down.
* Please wear protection goggles, safety gloves for your safety while in use or replacing blades.
* Please be aware for the harmful fume generated from the material during the operation.
Please have good ventilation for such cases.

Features

Unique ''TAF'' circuit keeps the output power stable and powerful.
Not likely other models, no need to keep holding down the operation switch on the handpiece switch (turns off automatically after 10 minutes operation).
High speed vibration, 40,000 cycle per second (40 kHz) assists smooth cutting with less pressure force.
Able to select Normal mode or High mode.
Main unit has handpiece holder. Handpiece settles safe while not in use.
CE compliance

　
Applicable material and thickness (reference)

Synthetic resin, Plastic. Epoxy putty, Paper, Cardboard,
Chemical fiber/ cloth, Polyester putty, 3D printed material, Silicone
Thickness: 3 mm maximum

The cutting experience described above may vary by the environment and hardness of the material.
For the material not listed above, please contact us, before you try.

Model No			Specifications
Oscillation frequency			40kHz
Power consumption			Approx. 40 W max.
AC adapter			100-240V, 50/60Hz, 80VA Output:12VDC 3.5A
Dimensions(WxDxHmm)		Main unit	173ｘ89ｘ76 (excluding protrusions)
		Handpiece	dia. 32ｘ144 (including blade)
Ambient operation condition			Temperature:10 to 35℃ Humidity:20 to 70% (No condensation)
Circuit protection			Temperature sensor inside of Handpiece Detection circuit for overload
Weight	Main unit		260g
	Handpiece		70g (including handpiece cable)
Power cable length			Total 2.7m (adapter cable 1.5m + AC cable 1.2m)
Handpiece cable length			1.6m
Accesories			Standard blade BDC-200P : 1 case of 40 replacement blades in 1 case. *Blades with holes can not be used Blade fixture ZH04 : 1 pce Blade fixing screw HB03 : 3 pcs Hexagon wrench RR02 : 1 pce In case of ordering of the standard blade as spare parts, please specify HA04 as a model name of the standard blade.
Transducer			Bolt-clamped Langevin type
Operation switch			Push switch (handpiece)
Plug shape of the standard AC cable			C type

■Included accessories:

Standard blade BDC-200P : 1 case of 40 replacement blades in 1 case. *Blades with holes can not be used

Blade fixture ZH04 : 1 pce

Blade fixing screw HB03 : 3 pcs

Hexagon wrench RR02 : 1 pce
In case of ordering of the standard blade as spare parts, please specify HA04 as a model name of the standard blade.

●Transducer : Bolt-clamped Langevin type

●Operation switch: Push switch (handpiece)

●Plug shape of the standard AC cable : C type

More detail about Carlssoon Technologies Sdn Bhd