SHIMPO – Digital Stroboscope DT-3011N: Top Choice in Melaka, Malaysia Carlssoon Technologies Sdn Bhd

Description

SHIMPO – Digital Stroboscope DT-3011N
Brand: Shimpo
Model: DT-3011N

Product Description:

The flashes enable high-accuracy rotational speed measurement and stop motion analysis. The device provides a wide measuring range from 40.0 to 35,000 rpm. With a phase adjustment function, it is possible to move an image while maintaining synchronization. Provided with an external signal connector as a standard feature, synchronization and delayed flash using external signals are also possible. A xenon lamp is used as the light source.

Product Features:

A wide measuring range
The high-accuracy flashing enables measurement covering a wide range between 40.0-35,000 rpm.
Provided with a phase adjustment function
It is possible to move an image while maintaining synchronization.
The standard feature of an external signal connector is provided for synchronization and delayed flash using external signals.
Provided with a memory function
The flashing frequency is memorized at the time of turning off the power and recalled when the power is turned on next time.

Technical Specification:

format		DT-311N	DT-315N
Number of flashes (rpm)		40.0 to 35000 0 to 35000 in external sync mode
Internal oscillation mode	Display decomposition function	0.1: 40.0 ~ 5000 0.2: ~ 8000 0.5: ~ 10000 1: ~ 35000
	Jump function	Yes (Pressing the dedicated switch doubles or doubles the number of flashes)
	Integer function	Yes (display decimals, do not set)
	Memory function	Yes (The number of flashes when the power is turned off is memorized, and the number of flashes is used when the power is turned on next time)
External sync mode	input signal	Voltage input H level: 2.5V to 12V L level: 0.8V MAX Pulse width 50μs or more Input impedance 10kΩ or more
	Speed measurement function	40.0 to 35000 rpm (disabled during delayed emission)
	Delayed emission	In the range of 40.0 to 10000 rpm, the　 delay angle can be set every 0 to 359 ° 1 °, or the delay time can be set every 0 to 2000 ms 1 ms.
display		5-digit red LED 7 segment
Synchronous output signal		12V voltage signal Pulse width approx. 400μs
Setter		Multi-turn encoder, tact switch
Flash light source		Xenon lamp
Ramp input		10W
power supply		AC100-120V	Rechargeable (dedicated Ni-Cd battery) Light emission for about 1 hour continuously or attached AC adapter g (quick charge for 2 hours) AC100V ± 10%
Luminous timer		Continuous lighting or stop emitting after a set time of 1 to 120 minutes
Power output for sensor		DC12V 40mA
Power cord		2.4m	―
Operating temperature		0-40 ℃
mass		1.2kg	2.1kg
accessories		Pistol grip	Dedicated adapter

More detail about Carlssoon Technologies Sdn Bhd