Home
Posts
Partner
Exhibitions
Analytics & Insights
Home
Posts
Partner
Exhibitions
Analytics & Insights
Global Gateway
DRIVER
OSRAM OT FIT 40/220–240/1A0 TW
OSRAM OT FIT 40/220–240/1A0 TW
E S L Lighting (M) Sdn Bhd
Category:
DRIVER
Available
For more information, visit our official website at
esllighting.com.my
Visit Official Site
Contact Us
Description
OSRAM OT FIT 40/220–240/1A0 TW
40/220–240/1A0 TW
Product family features
Cacle clamp housing for independent mounting
Dimmable on the leading edge and trailing edge
Housing for independent installation
Product family benefits
Compatible with the most common leading-edge and trailing phase dimmers
Flexible current setting (DIPswitch - 2 to 4 currents)
Flicker-free dimming
Higher quality of light thanks to < 5% output ripple current
Areas of application
Decorative illumination
Downlights, flat luminaires
Hospitality
Living areas
Museums, residential buildings
Offices
Shop lighting
Suitable for indoor SELV installations
Suitable for luminaires of protection class I and II
Electrical data
Nominal input voltage : 220…240 V
Mains frequency : 50...60 Hz
Input voltage AC : 198…264 V
Total harmonic distortion : < 20 %
Power factor λ : > 0.95
Device power loss : 6.0 W
Inrush current : < 10 A
Max. ECG no. on circuit breaker 10 A (B) : 21
Max. ECG no. on circuit breaker 10 A (C) : 21
Max. ECG no. on circuit breaker 16 A (B) : 33
Max. ECG no. on circuit breaker 16 A (C) : 33
Max. ECG no. on circuit breaker 25 A (B) : -
Surge capability (L/N-Ground) : 2 kV
Surge capability (L-N) : 1 kV
Nominal output voltage : 27…38 V
U-OUT (working voltage) : 60 V
Nominal output current : 700/800/900/1000 mA
Output current tolerance : ±10 %
Output ripple current (100 Hz) : < 20 %
Nominal output power : 38 W
Power loss in stand-by mode : <1 W
Galvanic isolation primary/secondary : SELV
Current set : DipSwitch
Product weight : 130.00 g
Cable cross-section, input side : 0.75 mm²
Cable cross-section, output side : 0.5 mm²
Wire preparation length, input side : 9.0...10.0 mm
Wire preparation length, output side : 9.0...10.0 mm
Length : 108.0 mm
Width : 67.0 mm
Height : 22.0 mm
Temperatures & operating conditions
Ambient temperature range : -20…+50 °C
Maximum temperature at tc test point : 80 °C
Max.housing temperature in case of fault : 110 °C
Temperature range at storage : -20…+80 °C
Permitted rel. humidity during operation : 5…85 %
Lifespan
ECG lifetime : 50000h
Capabilities
Dimmable : Yes
Dimming interface : Phase cut
Dimming range : 3…100 %
Dimming method : Trailing-edge phase dimmer
Overload protection : Automatic reversible
Short-circuit protection : Automatic reversible
No-load proof : Yes
Max. cable length to lamp/LED module : 2.0 m
Suitable for fixtures with prot. class : I / II
Type of connection, input side : Wago 744 or equivalent
Number of channels : 2
Certificates & standards
Approval marks – approval : CCC
Standards : Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Protection class : II
Type of protection : IP20
More detail about E S L Lighting (M) Sdn Bhd
E S L Lighting (M) Sdn Bhd
LED Lighting Supplier Selangor, Lighting Shop Seri Kembangan, Kuala Lumpur (KL), Decorative Lighting Supplies Malaysia ~ E S L Lighting (M) Sdn Bhd
Contact Us
Malaysia