Inlet Stem Nut

An inlet stem nut is a threaded fitting that is used to connect an oxygen regulator to an oxygen cylinder. The nut is typically made of brass or stainless steel and has a hexagonal head that allows it to be tightened with a wrench. The nut has a threaded bore that matches the inlet stem of the regulator. When the nut is tightened, it creates a seal that prevents oxygen from leaking from the regulator.

The size of the inlet stem nut depends on the size of the regulator and the cylinder. The most common size is 28mm, but there are also 24mm and 32mm sizes available.

Inlet stem nuts are an important safety component of oxygen regulators. They help to ensure that the regulator is properly connected to the cylinder and that oxygen does not leak. If an inlet stem nut is damaged or loose, it could allow oxygen to leak, which could be dangerous.

Here are some of the benefits of using an inlet stem nut for oxygen valve:

• It helps to prevent oxygen leaks.
• It is a reliable and durable fitting.
• It is easy to install and remove.
• It is available in a variety of sizes to fit different regulators and cylinders.

If you are using an oxygen regulator, it is important to make sure that the inlet stem nut is in good condition and that it is properly tightened. This will help to ensure your safety and the safety of others.

Here are some safety tips for using an inlet stem nut for oxygen valve:

• Always use a wrench to tighten the inlet stem nut. Do not overtighten the nut, as this could damage the regulator or the cylinder.
• Inspect the inlet stem nut regularly for signs of damage or wear. If the nut is damaged, replace it immediately.
• Never use a damaged or loose inlet stem nut.
• Keep the inlet stem nut clean and free of debris.

By following these safety tips, you can help to prevent oxygen leaks and ensure your safety.