Two Stage Low Pressure Screw Air Compressor

Product Features
Customize Two-stage Low-pressure Airend, Increase The Air Displacement By 20%
Through the two stage series process, the original single compression process is divided into two compression processes. The process setting can reduce the ratio of each single stage compression process, and then can effectively greatly reduce the drive power required by each stage screw in meshing and compression.

Double Frequency Conversion Control System, More Silent.
According to the working condition requirements of the compressor, the operation speed of the motor is obviously slowed down after the transformation of frequency conversion and speed regulation, so the noise of the air compressor is effectively reduced. Field measurements showed a noise reduction of about 3 to 7 decibels compared with the original system.

Double Air Filtration And Oil Gas Separation System Design
Adopt efficient imported filter, high quality filter element, adopt the original imported energy saving intake capacity regulating valve, stop the air does not return, do not spit oil, large diameter low pressure drop design, inspiratory efficiency to achieve optimal, effectively reduce energy consumption. An efficient oil-gas separation system is adopted to effectively reduce the loss of compressed gas and reduce the oil content of the compressed air at the outlet to the greatest extent.

High Efficiency Permanent Magnet Synchronous Motor, Efficiency Increased By 5%.
Automatic control of power consumption, as energy saving control, can greatly reduce the operating cost up to 35%.