This machine apply for cleaning electronic industrial SMT stencils，Misprint PCB ,PCBA and Squeegee. Use water-based clean solvent. With the industry's most advanced cleaning process to achieve 100% cleanliness and environmental protection
The machine consists of a cleaning system, rinsing system, drying system and filtration system.The machine use electricity and compressed air as energy, manually put the stencil /PCBA into the cleaning room, by touch screen set parameters of the cleaning, rinsing, drying and other related, press the start button, the stencil will be automatically cleaned, rinsed and dried.Automatically stop operation when the set cleaning process is finished and reset to achieve the next workflow.The machine is very convenient for cleaning stencils , improve production efficiency and quality.It belongs to a new type, high performance automatic cleaning equipment.The equipment uses water-based liquid cleaning agent and DI water for rinsing, without any safety risks, and no harm to personnel
◆High Pressure Spraying System for Cleaning Stencil with Water-based Cleaning Fluid
◆Double liquid tank, equipped with heating system, implementation needs cleaning-rinsing-drying
◆Cleaning process: cleaning - chemical isolation - rinsing (open loop/closed loop) - drying.
◆Preparation of advanced automatic touch screen operating software, Program parameters can be saved, Easy to use
◆The counting function of the system can automatically accumulate the number of cleaning stencils and the number of circulating filters
◆Liquid and the pump pressure can be displayed through the panel pressure gauge, feedback the equipment running status in time
◆Spray pressure is monitored by pressure sensor. If the pressure range is set, the alarm will be given
◆Direct reflux of liquid to reduce liquid consumption
◆Integral stainless steel body, strong and durable, resistant to acid, alkali cleaning fluid, etc
◆Rinse water can be filtered by ion to achieve long time zero discharge
◆High-pressure fan + hot air drying, drying effect faster and thorough
◆Lower operating costs, only 50-120 ml of liquid is needed for each cleaning. After cleaning, compressed air is used to recover pipeline and pump residual liquid, which can reduce liquid consumption by 50%
|
Dimension（mm） |
L1300*W1400*H1850 |
|
Applicable stencil size （mm） |
L740 *W740 * H40(max) |
|
Power supply |
AC380V 50HZ |
|
Total power |
30KW |
|
Gas source |
0.4～0.7Mpa |
|
Source of water |
0.2～0.4Mpa |
|
Exhaust port |
Ø125 |
|
Cleaning/Rinsing liquid tank volume |
42L*2PCS（max） |
|
Optimum liquid usage |
35L*2PCS |
|
Cleaning fluid isolation time |
40S |
|
Clean time |
3～8Min |
|
Rinse time |
3～10Min |
|
Dry time |
3～10Min |
|
Cleaning and rinsing methods |
Left and right movable high pressure liquid spray cleaning |
|
Drying method |
High pressure hot air shearing (optional super type) |
|
times of rinsing |
1-99 times (settable) |
|
Cleaning liquid recovery filtration |
Filtration of 5 microns (filtering microorganisms: red gum and contaminants) |
|
Rinsing liquid discharge filtration |
Filtration of 5 microns (filtering microorganisms: red gum and contaminants) |
|
Liquid heating temperature |
Room Temperature to 60 ℃ |
|
DI Water Supply |
30～60L/min |
|
DI Water Pressure |
0.2--0.4Mpa |
|
DI Water Access Connection Pipeline |
3/4 inches |
|
noise |
Less than50 decibels |
|
Net Machine Weight |
550Kg |
Malaysia
