For surface cleaning of SMT PCB and PCBA in electronic industry, the most advanced cleaning technology in the industry is used to achieve 100% cleanness and environmental protection
The machine is composed of cleaning system, rinsing system, fine rinsing, drying system and filtration system
100% Close loop operation, Zero discharge
The equipment is rinsed with water-based liquid detergent and DI water, without any potential safety hazard and no harm to personnel
◆High pressure spray system for PCB / PCBA cleaning process with water-based detergent
◆Three liquid tanks equipped with heating system to meet the needs of cleaning, rough rinsing, fine rinsing and hot air drying
◆Process flow: Cleaning - chemical isolation - rinsing (open-loop / closed-loop) - drying
◆Advanced automatic touch screen operation software, program files can be saved and easy to use
◆The counting function of the system can automatically accumulate the number of cleaning PCB boards and the number of cycles of filtering
◆The liquid and pump pressure can be displayed by the panel pressure gauge to feed back the operation status of the equipment in time
◆Conductivity monitoring rinse liquid to ensure cleanliness, conductivity can be set to meet different PCB process requirements
◆Solid and durable overall stainless steel body; acid or alkaline detergent resistant
◆The rinsing method is overflow, and the water from the fine rinsing overflows to the rough rinsing tank without repeated pollution
◆High pressure fan + hot air drying, the drying effect is faster and thorough
◆Running cost more low, just consumption 80-120ml solvent for pre clean cycle. the residual liquid on pipeline and pump will direct recycle, could reduce 50% consumption
Dimension(mm) |
L1670*W1100*H1860 |
Power supply |
Three phase380V(3 phase 5 cable) |
Total Power |
33KW |
Current |
50A |
Air supply |
0.4-0.6Mpa |
Exhaust port |
Ø125 |
Clean tank volume |
42L |
Pre-rinse tank volume |
28L |
Rinse tank volume |
55L |
Filter |
0.2μm 10 inch |
Clean basket |
500*550*100MM(two layer) |
Clean time |
8--10Min |
Clean method |
Spray-Pre rinse- Rinse- hot-air drying |
Control |
PLC+Touch screen( One button start ) |