SP-60 Plasma Electrode

SP-60 Plasma Electrode

Category: SP-60 Plasma Cutting Torch & Parts Available
For more information, visit our official website at mingases.com

Description

The SP-60 plasma electrode is a consumable part for plasma cutting torches. It is made of hafnium, which is a very hard and heat-resistant material that can withstand the high temperatures of plasma cutting. The SP-60 electrode is designed for use with plasma torches that have a cutting current of 40-80 amps. It can cut through materials up to 15mm thick.

The SP-60 electrode is a wear item and will need to be replaced periodically. The frequency of replacement will depend on the amount of use and the type of materials being cut. In general, the SP-60 electrode should be replaced when the tip becomes pitted or worn.

To replace the SP-60 electrode, first turn off the plasma cutter and disconnect the torch from the power supply. Then, unscrew the nozzle and shield cup from the torch. The electrode is held in place by a retaining ring. Remove the retaining ring and carefully pull out the old electrode. Insert the new electrode into the torch and secure it with the retaining ring. Finally, screw the nozzle and shield cup back onto the torch.

Here are some of the benefits of using the SP-60 plasma electrode:

If you are looking for a high-quality, long-lasting plasma electrode, the SP-60 is a great option. It is easy to use and produces precise cuts, making it a good choice for a variety of applications.

More detail about MIN HARDWARE & INDUSTRIAL GASES SDN BHD
MIN HARDWARE & INDUSTRIAL GASES SDN BHD
MIN HARDWARE & INDUSTRIAL GASES SDN BHD Industrial Gases Supplier Penang | Hardware Equipment & Safety Products | Medical Oxygen Dealer Malaysia ~ MIN HARDWARE & INDUSTRIAL GASES SDN BHD
Contact Us flagMalaysia