Renishaw SP25M Probe & Modules

Description

At only 25 mm in diameter, and with a range of scanning and touch-trigger modules, the SP25M is the world's most compact and versatile scanning probe system.

 

The SP25M comprises two sensors in a single housing. Users can switch between a choice of five scanning modules (which can carry M3 styli with lengths from 20 mm to 400 mm) and an adaptor module that is compatible with Renishaw's TP20 range of probe modules. This capability enables scanning and touch-trigger probing in a single probe system.

The SP25M's compact size and autojoint mounting makes it compatible with the PH10M PLUS / PH10MQ PLUS and PH6M probe heads. It can also be mounted on a multiwired extension bar. Together, these combinations permit excellent reach and access to part features.

For details of the technology in SP25M, refer to the SP25M technical paper.

Features and benefits

• World's smallest scanning probe at only 25 mm in diameter

  A range of FCR25 module change systems, each of which allows any of the SP25M system elements to be stored in each port.

  • SM25 scanning modules and the TM25-20 TTP module adaptor can be docked directly into the FCR25 ports
  • SH25 scanning stylus holders require a PA25-SH adaptor
  • TP20 modules can be stored using PA25-20 adaptors
• Excellent metrology - isolated optical sensing and 3rd order polynomial compensation
• Five modules provide optimal performance across a range of stylus lengths (up to 400 mm)
• Two sensors in one - scanning and touch-trigger
• Crash protection and simple stylus changing
• Fast and simple probe calibration cycle
• Ideal for profile and form measurement
• Suitable for use on motorised indexing heads for greater flexibility and shorter scanning cycle times
• Simple and robust design for greater reliability - no motors or locking mechanisms

SP25M modules and stylus holders

A range of module kits allows SP25M users to build up their probing capability over time.

Each SM25-# scanning module is optimised in terms of gain and spring rate to suit the range of stylus lengths specified. For every module, there is a matching SH25-# stylus holder.

The SH25-3 and SH25-4 stylus holders are constructed with a fixed carbon fibre stem to which an M3 stylus is mounted, selected to provide the correct working length.

Whilst the SP25M can carry cranked (non straight) styli configurations when using SM25-1 / 2 / 3 / 4 / 5 scanning modules and the original standard stylus holders (SH25-1 / 2 / 3 / 4 / 5), for optimum metrology where larger offsets are required Renishaw recommends the SH25-2A / 3A / 4A range of stylus holder, specifically designed to meet the challenges posed by such stylus arrangements.

 

                                                                             

SM25-1                                                                                           SM25-2
To be used with SH25-1                                                                 To be used with SH25-2

Stylus length: 20 mm to 50 mm                                                      Stylus length: 50 mm to 105 mm

                                                                               
SM25-3                                                                                            SM25-4

To be used with SH25-3                                                                  To be used with SH25-4

Stylus length: 120 mm to 200 mm                                                   Stylus length: 220 mm to 400 mm

                                                                              
SM25-5                                                                                             TM25-20 TTP adaptor module

To be used with SH25-5 for non-straight and                                   To be used with TP20 touch-trigger modules and extensions
star stylus arrangements

Stylus length: 20 mm to 100 mm

 

FCR25 flexible change racks

A range of FCR25 module change systems, each of which allows any of the SP25M system elements to be stored in each port.

• SM25 scanning modules and the TM25-20 TTP module adaptor can be docked directly into the FCR25 ports
• SH25 scanning stylus holders require a PA25-SH adaptor
• TP20 modules can be stored with the help of a PA25-20 adaptor

 

More detail about MECHTRO INSPECTION SDN BHD