ExoWrap, the ‘one-step’ insulation system, is the quick and easy way to insulate high temperature surfaces in vessel engine rooms.
ExoWrap is a revolutionary system made from biosoluble vitreous silicate fibre which is reinforced with an outer jacket of heat sealed aluminum foil. In tape or blanket format, ExoWrap is applied in one step eliminating the need for bulky and time consuming layered insulation.
ExoWrap can be easily removed and reinstalled by using the ExoWrap Silhesive Tape and is rated for use to 1,000 C max. ExoWrap can be used throughout the engine room.
| IMPA Code: 813871 | |
|---|---|
| Width: | 50mm(2″) |
| Thickness: | 3mm(1/8″) |
| Length: | 7.7m(25′) |
| Roll/Box: | 24 |
| IMPA Code: 813872 | |
| Width: | 100mm(4″) |
| Thickness: | 12mm(1/2″) |
| Length: | 3.3m(10′) |
| Roll/Box: | 6 |
| IMPA Code: 813873 | |
| Width: | 300mm(12″) |
| Thickness: | 25mm(1″) |
| Length: | 7.7m(25′) |
| Roll/Box: | 2 |
| IMPA Code: 813874 | |
| Width: | 600mm(24″) |
| Thickness: | 25mm(1″) |
| Length: | 7.7m(25′) |
| Roll/Box: | 1 |
For use on bent and flanged pipes in areas where maintenance is not a consideration and/or space is limited. ExoWrap has a pressure sensitive adhesive on the inner side for ease of installation.ExoWrap Tape
Application Instructions
Meets IMO Resolution MSC.61(67) - Adoption of the international code for application of fire test procedures. Each ExoWrap Blanket Roll is supplied with one roll of ExoWrap Silhesive Tape for fastening.
Meets SOLAS Regulation ll – 2/15.2.10 - “Surfaces with temperatures above 220°C which may be impinged as a result of a fuel system failure shall be properly insulated.”
For use on straight pipes, valves, exhaust equipment, turbochargers, angled and uneven surfaces and anywhere that insulation is required. ExoWrap Blankets are secured with ExoWrap Silhesive Tape for ease of maintenance.
Application Instructions
