AP- series: Top Choice in Malaysia, Penang, Johor Bahru (JB), Thailand, Philippines, Vietnam OS Electronics Sdn Bhd

Capacity	220g
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 215(W) x 411(D) x 346(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Included
Adjustable Internal Windbreak Plate	Included
Touchless Sensors	Included
Automatic Doors	Included
Clock-CAL	Included
Sample (Concentration) Preparation	Included
Minimum display	0.01 mg
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	8 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.1 mg
Minimum Weight *2	20 mg
Repeatability (Standard deviation)	0.015mg (to 20g) 0.03mg (to 100g) 0.05mg (to Minimum Weight)
External Calibration Weight Range for Span Calibration	95 to 220.00090 g （200g）
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

*1 Minimum display 0.01mg models provide two internal weights as standard.
*2 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5% (or 5 grams’ weight). In the case of the AP225W, the results are for tests carried out with the optional internal windbreak plate applied. The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use.
*3 The response time for displaying 90% of the added sample amount value in trace measurements (from 1mg)
*4 The response time value is typical.
*5 Non-condensing.

Show Less

Capacity	135 g
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 215(W) x 411(D) x 346(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Included
Adjustable Internal Windbreak Plate	Included
Touchless Sensors	Included
Automatic Doors	Included
Clock-CAL	Included
Sample (Concentration) Preparation	Included
Minimum display	0.01 mg
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	8 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.1 mg
Minimum Weight *2	30 mg
Repeatability (Standard deviation)	0.05 mg
External Calibration Weight Range for Span Calibration	45 to 135.009 g (100 g)
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Show Less

Capacity	220 g / 102g
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 215(W) x 411(D) x 346(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Included
Adjustable Internal Windbreak Plate	Included
Touchless Sensors	Included
Automatic Doors	Included
Clock-CAL	Included
Sample (Concentration) Preparation	Included
Minimum display	0.01 mg / 0.1 mg
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	2 sec. / 8 sec
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.2 mg /±0.1 mg
Minimum Weight *2	30 mg
Repeatability (Standard deviation)	0.1 mg / 0.05 mg
External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Show Less

Capacity	120 g / 52g
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 215(W) x 411(D) x 346(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Included
Adjustable Internal Windbreak Plate	Included
Touchless Sensors	Included
Automatic Doors	Included
Clock-CAL	Included
Sample (Concentration) Preparation	Included
Minimum display	0.01 mg / 0.1 mg
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	2 sec. / 8 sec
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.2 mg /±0.05 mg
Minimum Weight *2	30 mg
Repeatability (Standard deviation)	0.1 mg / 0.02 mg
External Calibration Weight Range for Span Calibration	95 to 120.0090 g (100 g)
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Show Less

Capacity	320 g
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.0 kg
Body Dimensions	Approx. 215(W) x 367(D) x 346(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Included
Adjustable Internal Windbreak Plate	Not Available
Touchless Sensors	Included
Automatic Doors	Included
Clock-CAL	Included
Sample (Concentration) Preparation	Included
Minimum display	0.1 mg
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	2 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.3 mg
Minimum Weight *2	200 mg
Repeatability (Standard deviation)	0.15 mg
External Calibration Weight Range for Span Calibration	95 to 320.009 g (300 g)
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Show Less

Capacity	220 g
Inspection Support Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.0 kg
Body Dimensions	Approx. 215(W) x 367(D) x 346(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Included
Adjustable Internal Windbreak Plate	Not Available
Touchless Sensors	Included
Automatic Doors	Included
Clock-CAL	Included
Sample (Concentration) Preparation	Included
Minimum display	0.1 mg
mol Conversion Function	Included
HPLC Buffer Solution Preparation	Included
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	2 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.2 mg
Minimum Weight *2	200 mg
Repeatability (Standard deviation)	0.1 mg
External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Show Less

Capacity	220g
mol Conversion Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 411(D) x 345(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Optional
Clock-CAL	Included
Inspection Support Function	Included
Sample (Concentration) Preparation	Included
HPLC Buffer Solution Preparation	Included
Minimum display	0.01 mg
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	8 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.1 mg
Minimum Weight *2	20 mg
Repeatability (Standard deviation)	0.015mg (to 20g) 0.03mg (to 100g) 0.05mg (to Minimum Weight)
External Calibration Weight Range for Span Calibration	95 to 220.00090 g （200g）
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

*1 Minimum display 0.01mg models provide two internal weights as standard.
*2 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5% (or 5 grams’ weight). In the case of the AP225W, the results are for tests carried out with the optional internal windbreak plate applied. The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use.
*3 The response time for displaying 90% of the added sample amount value in trace measurements (from 1mg)
*4 The response time value is typical.
*5 Non-condensing.

Show Less

Capacity	220 g/102 g
Minimum display	0.1 mg/0.01 mg

Capacity	135 g
mol Conversion Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 212(W) x 411(D) x 345(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Optional
Clock-CAL	Included
Inspection Support Function	Included
Sample (Concentration) Preparation	Included
HPLC Buffer Solution Preparation	Included
Minimum display	0.01 mg
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	8 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.1 mg
Minimum Weight *2	30 mg
Repeatability (Standard deviation)	0.05 mg
External Calibration Weight Range for Span Calibration	45 to 135.009 g (100 g)
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Show Less

Capacity	320 g
Minimum display	0.1 mg

Capacity	220 g
Minimum display	0.1 mg

Capacity	120 g
Minimum display	0.1 mg

Capacity	320 g
Minimum display	0.1 mg

Capacity	220 g
Minimum display	0.1 mg

Capacity	120 g
Minimum display	0.1 mg

Capacity	320 g
Minimum display	0.1 mg

Capacity	220 g
Minimum display	0.1 mg

Capacity	120 g
Minimum display	0.1 mg

Capacity	120 g/52 g
Minimum display	0.1 mg/0.01 mg

Capacity	120 g / 52g
mol Conversion Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 411(D) x 345(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Optional
Clock-CAL	Included
Inspection Support Function	Included
Sample (Concentration) Preparation	Included
HPLC Buffer Solution Preparation	Included
Minimum display	0.01 mg / 0.1 mg
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	2 sec. / 8 sec
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.2 mg /±0.05 mg
Minimum Weight *2	30 mg
Repeatability (Standard deviation)	0.1 mg / 0.02 mg
External Calibration Weight Range for Span Calibration	95 to 120.0090 g (100 g)
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Show Less

Capacity	135 g
Minimum display	0.01 mg

Capacity	320 g
mol Conversion Function	Not Included
Display	OEL display (dot matrix)
Weight	Approx. 6.5 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Not Included
Clock-CAL	Not Included
Inspection Support Function	Not Included
Sample (Concentration) Preparation	Not Included
HPLC Buffer Solution Preparation	Not Included
Minimum display	0.1 mg
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time *4	2 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.3 mg
Minimum Weight *2	200 mg
Repeatability (Standard deviation)	0.15 mg
External Calibration Weight Range for Span Calibration	95 to 320.009 g (300 g)
Calibration Weight	No
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)

Show Less

Capacity	220 g
mol Conversion Function	Not Included
Display	OEL display (dot matrix)
Weight	Approx. 6.5 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Not Included
Clock-CAL	Not Included
Inspection Support Function	Not Included
Sample (Concentration) Preparation	Not Included
HPLC Buffer Solution Preparation	Not Included
Minimum display	0.1 mg
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time *4	2 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.2 mg
Minimum Weight *2	200 mg
Repeatability (Standard deviation)	0.1 mg
External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	No
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)

Show Less

Capacity	120 g
mol Conversion Function	Not Included
Display	OEL display (dot matrix)
Weight	Approx. 6.5 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Not Included
Clock-CAL	Not Included
Inspection Support Function	Not Included
Sample (Concentration) Preparation	Not Included
HPLC Buffer Solution Preparation	Not Included
Minimum display	0.1 mg
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time *4	2 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.2 mg
Minimum Weight *2	200 mg
Repeatability (Standard deviation)	0.1 mg
External Calibration Weight Range for Span Calibration	45 to 120.009 g (100 g)
Calibration Weight	No
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)

Show Less

Capacity	320 g
mol Conversion Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.0 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Optional
Clock-CAL	Included
Inspection Support Function	Included
Sample (Concentration) Preparation	Not Included
HPLC Buffer Solution Preparation	Not Included
Minimum display	0.1 mg
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time *4	2 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.3 mg
Minimum Weight *2	200 mg
Repeatability (Standard deviation)	0.15 mg
External Calibration Weight Range for Span Calibration	95 to 320.009 g (300 g)
Calibration Weight	Built-in
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)　Ionizer

Show Less

Capacity	220 g
mol Conversion Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.0 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Optional
Clock-CAL	Included
Inspection Support Function	Included
Sample (Concentration) Preparation	Not Included
HPLC Buffer Solution Preparation	Not Included
Minimum display	0.1 mg
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time *4	2 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.2 mg
Minimum Weight *2	200 mg
Repeatability (Standard deviation)	0.1 mg
External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	Built-in
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)　Ionizer

Show Less

Capacity	120 g
mol Conversion Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.0 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Optional
Clock-CAL	Included
Inspection Support Function	Included
Sample (Concentration) Preparation	Not Included
HPLC Buffer Solution Preparation	Not Included
Minimum display	0.1 mg
Recipe Compounding	Not Included
USB Device (Type B)	Included
USB Host (Type A)	Not Included
Response Time *4	2 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.2 mg
Minimum Weight *2	200 mg
Repeatability (Standard deviation)	0.1 mg
External Calibration Weight Range for Span Calibration	45 to 120.009 g (100 g)
Calibration Weight	Built-in
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)　Ionizer

Show Less

Capacity	320 g
mol Conversion Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Optional
Clock-CAL	Included
Inspection Support Function	Included
Sample (Concentration) Preparation	Included
HPLC Buffer Solution Preparation	Included
Minimum display	0.1 mg
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	2 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.3 mg
Minimum Weight *2	200 mg
Repeatability (Standard deviation)	0.15 mg
External Calibration Weight Range for Span Calibration	95 to 320.009 g (300 g)
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Show Less

Capacity	220 g
mol Conversion Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Optional
Clock-CAL	Included
Inspection Support Function	Included
Sample (Concentration) Preparation	Included
HPLC Buffer Solution Preparation	Included
Minimum display	0.1 mg
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	2 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.2 mg
Minimum Weight *2	200 mg
Repeatability (Standard deviation)	0.1 mg
External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Show Less

Capacity	120 g
mol Conversion Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 367(D) x 345(H)mm
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Optional
Clock-CAL	Included
Inspection Support Function	Included
Sample (Concentration) Preparation	Included
HPLC Buffer Solution Preparation	Included
Minimum display	0.1 mg
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	2 sec.
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.2 mg
Minimum Weight *2	200 mg
Repeatability (Standard deviation)	0.1 mg
External Calibration Weight Range for Span Calibration	45 to 120.009 g (100 g)
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

Show Less

Capacity	220 g / 102g
mol Conversion Function	Included
Display	OEL display (dot matrix)
Weight	Approx. 7.9 kg
Body Dimensions	Approx. 213(W) x 411(D) x 345(H)mm (power supply unit included)
Pan Size	ø91 mm
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% *5
Ionizer	Optional
Clock-CAL	Included
Inspection Support Function	Included
Sample (Concentration) Preparation	Included
HPLC Buffer Solution Preparation	Included
Minimum display	0.01 mg / 0.1 mg
Recipe Compounding	Included
USB Device (Type B)	Included
USB Host (Type A)	Included
Response Time *4	2 sec. / 8 sec
Response Time for race Measurements *3	2 sec.
Linearity *2	±0.2 mg /±0.1 mg
Minimum Weight *2	30 mg
Repeatability (Standard deviation)	0.1 mg / 0.05 mg
External Calibration Weight Range for Span Calibration	95 to 220.009 g (200 g)
Calibration Weight	Built-in *1
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

AP- series

AP225W-AD

AP135W-AD

AP225WD-AD

AP125WD-AD

AP324W-AD

AP224W-AD

AP225W

AP225WD

AP135W

AP324Y

AP224Y

AP124Y

AP324X

AP224X

AP124X

AP324W

AP224W

AP124W

AP125WD

AP125WD

AP135W

AP324Y

AP224Y

AP124Y

AP324X

AP224X

AP124X

AP324W

AP224W

AP124W

AP225WD