MXLE102C Large Flow Low Energy Heatless Dryer

MXLE102C Large Flow Low Energy Heatless Dryer

Category: Desiccant Air Dryer Available
For more information, visit our official website at apexair-engineering.com

Specifications
  • Flow Rate | 流量: 408 m/h @7 barg (240 cfm @102 psig)
  • Division | 部门: 气体分离与过滤部 EMEA
  • Pressure Dew Point | 压力露点: -40°C (-40°F) or -20°C (-4°F) Option
  • ISO Grade | ISO 等级: Class 2.2.2 or Class 2.3.2
  • Port Size | 端口尺寸: 2 inch
  • Operating Pressure | 操作压力: 4 to 13 barg (58 to 190 psig)
  • Operating Temperature | 操作温度: 5 to 50°C (41 to 122°F)
  • Ambient Temperature | 环境温度: 55°C (131°F) 最大
  • Connection Type | 连接类型: BSPP
  • Electrical Requirements | 电气要求: Standard: 400V +/-10% 3PH 50Hz Option: 460V +/-10% 3PH 60Hz
  • Noise Level | 噪音水平: <75 dB(A)
  • Dimension (Height x Width x Depth) | 尺寸(高度 x 宽度 x 深度): 1647mm x 793mm x 550mm
  • Weight | 重量: 265 Kg (583 lbs)
Description

The MXLE compressed air dryer has been purposefully engineered to combine the advantages of an MX heatless adsorption dryer with the added benefits of reduced energy expenses and a smaller environmental footprint, thanks to its vacuum-based regeneration method. This innovation permits approximately 17% more of the produced clean and dry compressed air to be efficiently utilized throughout the entire facility.

The MXLE compressed air dryer comes equipped with pre and post OIL-X filters, which have undergone rigorous third-party testing in accordance with ISO12500-1 / ISO8573-4 standards, resulting in delivered air quality that complies with ISO8573-1.

Its modular construction enhances flexibility; similar to the MX model, these units can be grouped together to provide additional compressed air drying capacity should the demand surge. This distinctive feature allows for a 100% standby capability, all at a fraction of the cost of a conventional twin tower dryer. Moreover, individual dryers can be easily isolated for routine maintenance, all while ensuring a consistent supply of clean and dry air to the facility. Additionally, MXLE offers an extra layer of security through a full backup mode. In the unlikely event of a vacuum pump malfunction, the dryer can seamlessly switch to full heatless operation to keep the facility running smoothly.

Under full load conditions, the MXLE consumes an average of 60% less energy compared to a typical heatless dryer and 39% less energy compared to a heat regenerative dryer of similar capacity. These energy savings are further amplified during periods of low air demand, thanks to the integrated Energy Saving Technology (EST) that comes as a standard feature.

The construction of this compressed air dryer meets FDA Title 21 requirements and is exempt under EC1935-2004 regulations. As a result, the MXLE compressed air dryer is exceptionally well-suited for applications in the food, beverage, and pharmaceutical industries.

More detail about APEX AIR ENGINEERING (S) PTE. LTD.
APEX AIR ENGINEERING (S) PTE. LTD.
APEX AIR ENGINEERING (S) PTE. LTD. Air Compressor System Distributor Singapore (SG), Air Dryer Maintenance Selangor, Compressed Air Accessories Supplier KL, Malaysia ~ APEX AIR ENGINEERING (S) PTE. LTD.
Contact Us flagMalaysia