High-performance hardware and intelligent measurement software enable coordinate measuring machines with computed tomography to achieve ever higher accuracies and measuring speeds. This means that industrial computed tomography can now also be used for fast 3D measurements close to production and statistical process control (SPC) in addition to applications in the laboratory and the measuring room. Unlike other sensors, the complete three-dimensional workpiece volume, including undercuts and internal geometries, is always available as a measurement result at the touch of a button.
Sensor principle
X-ray tomographic
Measuring range
Max. Workpiece dimensions D = 120 mm / L = 93 mm to D = 500 mm / L = 1010 mm (depending on the aspect ratio of the workpieces)
Accuracy
Permissible probing error up to 2.5 µm
Functionality
The radiation emitted by the X-ray tube a) produces X-ray images of the workpiece b) on the detector c). A virtual workpiece volume is reconstructed from the X-ray images taken in different rotational positions.
Cost-effective high-performance X-ray source for economical measurement
Fast measurement of small workpieces
This maintenance-free source type offers high availability and is therefore ideal for use close to production. The warranty is two years without shift limitation. The high tube power of up to 500 watts enables very short measuring times.
Technical Data
Acceleration voltages
up to 160 kV
Tube Power
up to 500 W
High-power X-ray source for fast inline measurement
.png)
Fast measurement of dense or large workpieces
The high tube powers of up to 1500 watts enable very short measuring times and make this source ideal for inline or atline applications. Long maintenance intervals paired with high power predestine this source type for measuring tasks with high demands on measuring speed and availability.
Technical Data
Acceleration voltages
up to 450kV
Tube Power
up to 1500 W
High-resolution X-ray source for economical measurement with high resolution
.png)
Fast measurement with high resolution in compact design
These X-ray sources in monoblock design, unique in the market, enable measurements in high resolution with extremely short measuring times. By using transmission targets, these tubes offer focal spot sizes of a few micrometres even at high powers. This allows up to five times higher measuring speed compared to sources with reflection target. The unique monoblock design in open construction, where the tube head, the high voltage generator and the vacuum pump form one unit, allows very low maintenance costs with unlimited lifetime.
Technical Data
Acceleration voltages
up to 160 kV and 200 kV respectively
Tube Power
up to 80 W
Microfocus X-ray source for economical measurement with medium resolution
.png)
Maintenance-free X-ray source in compact design
This X-ray source offers high availability and is therefore predestined for use close to production. The closed monoblock design allows maintenance-free use of the source. Power-dependent focussing allows the measurement of the smallest details.
Technical Data
Acceleration voltages
up to 130 kV
Tube Power
up to 40 W
High-resolution X-ray source for larger workpieces
.png)
Fast measurement with high resolution of dense or large workpieces
By using a high power transmission target, these sources offer focal spot sizes of a few microns even at high powers. This allows up to five times higher measuring speed compared to sources with reflection target. Due to the high acceleration voltages of up to 300 kV, even dense and larger workpieces or assemblies can be measured with high resolution in the shortest possible time.
Technical Data
Acceleration voltages
up to 300 kV
Tube Power
up to 80 W
High power X-ray source for fast inline measurement
.png)
Fast measurement of dense or large workpieces
The high tube powers of up to 1500 watts enable very short measuring times and make this source ideal for inline or atline applications. Long maintenance intervals paired with high power predestine this source type for measuring tasks with high demands on measuring speed and availability.
Technical Data
Acceleration voltages
up to 450 kV
Tube Power
up to 1500 W
X-ray source with sub-micrometre resolution
.png)
Measurement with highest resolution in the sub-micrometer range
By using a high-performance transmission target with separate cooling and refocusing of the electron beam, these sources offer focal spot sizes in the sub-micrometre range. Evaluations of micro-structures such as particles, fibres, layer thicknesses, micro-cracks or voids are no problem. With acceleration voltages of up to 240 kV, even small metal workpieces can be tomographed and evaluated with micrometre precision.
Technical Data
Acceleration voltages
up to 240 kV
Tube Power
up to 50 W
.png)
Energy-efficient measurement with area sensors
According to requirements, various area sensors can be used in Werth coordinate measuring machines with X-ray computed tomography. These differ, among other things, in their design, dimensions, pixel size and number, and speed. A modular device design allows optimum adaptation to the respective requirements.
Technical Data
Pixel sizes
between 50 µm and 400 µm
Integration times
up to 15 milliseconds
Sensor surfaces
from 50 mm x 50 mm to 430 mm x 430 mm
Number of pixels per detector line
from 1000 pixels to 6000 pixels
.png)
Malaysia
