Description
Injection Molded Products
Our Injection Molding Division provides precision machinery components and other small, complex products, as well as products with superior resistance to chemicals and wear.
TI-200/7000 Series (PPS/PEEK-based)
Coating Technology Imbibed with Noncohesive Toner that Offers High Heat Resistance and Strength
The TI-200 Series is based on PPS resin, which offers superior heat resistance and flame retardancy, strengthened with special fibers. Its favorable moldability lends itself well for manufacturing with reliably high accuracy. In addition, the series has a superior application to the PTFE coating which makes the toner non-cohesive. The TI-7000 Series is based on PEEK, a resin whose heat resistance is better than that of TI-200, and reinforced by special fibers. Because of this, TI-7000 has a superior application to the PFA coating which improves toner non-cohesiveness much further.
Disengaging Latch Grade Properties Table:
| Property |
Testing Method |
Unit |
240A |
7200 |
8000 |
7500 |
5013 |
550F |
| Specific gravity |
D792 |
|
1.73 |
1.47 |
1.70 |
1.75 |
1.40 |
2.17 |
| Water absorption (24 Hrs) |
D570 |
% |
0.02 |
0.02 |
0.05 |
0.08 |
0.33 |
0.03 |
| Tensile strength |
D638 |
MPa |
180 |
98 |
120 |
170 |
186 |
32 |
| Tensile elasticity |
D638 |
% |
3.0 |
3.5 |
2.1 |
3.0 |
15.0 |
410 |
| Bending strength |
D790 |
MPa |
270 |
127 |
190 |
280 |
235 |
|
| Bending elasticity |
D790 |
GPa |
18.0 |
6.9 |
12.9 |
14.0 |
4.9 |
|
| Izod impact strength (notched) |
D256 |
J/m |
45 |
25 |
|
30 |
127 |
Nondestructive |
| Deflection temperature under load (1.82 MPa) |
D648 |
°C |
>260 |
>260 |
>290 |
>290 |
278 |
|
| Coating |
|
|
PTFE |
PTFE |
PFA |
PFA |
PTFE |
None |
| Application example(s) |
|
|
Fixing pawl |
Fixing pawl |
Fixing pawl |
Fixing pawl |
Fixing pawl
Drum pawl |
Fixing pawl |
* This is a table of representative examples based on values measured from testing carried out under specific
More detail about ABV Global Holdings Sdn. Bhd.
Malaysia
