Specifications
- Flanges of Plates: Tank panels pressed with a combined double flange at an angle of 45 degree and 90 degree to the face of the plate on four sides.
- Stays and Cleats: The stays and cleats are made of steel angle bar and steel plate.
- Bolts, Nuts and Washers: Hot Dipped Galvanised steel bolts, nuts and washers for internal and external.
- Jointing Materials: Non toxic PVC foam to be used for all jointing between tank panel flange.
- Tank Cover: Panel type steel cover supported by trusses.
530mm x 530mm square manhole and PVC air-vent supplied as standard for each compartment.
- Water Level Indicator: Standard: Reverse Reading Pointer Mechanical Type (Cat & Mouse)
Optional: Direct Reading Clear Tube Type.
- Nozzels for Connection: Short pipe with flange or socket for all pipe connections.
- Ladder: Aluminium or HDG Steel ladder for internal and external access, 300mm width.
- Skid Base: None.
- Finish: Hot Dip Galvanised conform to ISO 1461.
Description
Standard
Pressed steel sectional water tank constructed with hydraulically pressed flanged panels, conform to BS 1564: 1975 and SS22: 1979.
Materials
The steel used in the manufacture of the tank plates, stays and cleats conform to the requirements of BS 4360: 1972 grade 43A or ISO equivalent.
Standard Thickness for 1.22m x 1.22m Tank Panel
| Type |
1.22m (H) |
2.44m (H) |
3.66m (H) |
4.88m (H) |
| 4th side panels |
|
|
|
5mm |
| 3rd side panels |
|
|
5mm |
5mm |
| 2nd side panels |
|
5mm |
5mm |
5mm |
| 1st side panels |
5mm |
5mm |
5mm |
6mm |
| Bottom panels |
5mm |
5mm |
5mm |
6mm |
*Note : Specification may vary according to customer requirements
Standard Thickness for 1m x 1m Tank Panel
| Type |
1.0m (H) |
2.0m (H) |
3.0m (H) |
4.0m (H) |
5.0m |
| 5th side panels |
|
|
|
|
5mm |
| 4th side panels |
|
|
|
5mm |
5mm |
| 3rd side panels |
|
|
5mm |
5mm |
5mm |
| 2nd side panels |
|
5mm |
5mm |
5mm |
5mm |
| 1st side panels |
5mm |
5mm |
5mm |
5mm |
5mm |
| Bottom panels |
5mm |
5mm |
5mm |
5mm |
5mm |
*Note : Specification may vary according to customer requirements.
More detail about WELLTECH (M) SDN. BHD.
Malaysia
