Description
Fast Curing Anchoring Adhesive
Solvent and styrene free based, two-component polyester anchoring adhesive.
- Fast curing
- Standard guns can be used
- Can be used at low temperatures
Usage
As a fast curing anchoring adhesive for all grades of:
- Rebars / reinforcing steel
- Threaded rods
- Bolts and special fastening systems
In the following substrates:
- Concrete
- Hollow and solid masonry
- Hard natural stone*
- Solid rock*
* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-1 Adhesive must be tested by first applying Sika AnchorFix®-1 Adhesive only to a sample area. Check in particular bond strength, surface staining and discolouration.
Advantages
- Fast curing
- Standard guns can be used
- Can be used at low temperatures
- High load capacity
- ETA for anchoring in uncracked concrete
- ETA for anchoring in solid and hollow masonry
- Non-sag, even overhead
- Styrene-free
- Low odour
- Low wastage
More detail about Hiap Huat Chan Timber And Hardware Sdn. Bhd.
