%READY STOCK %PERODUA BEZZA 1.3 ND DISCHARGE HOSE (7620) HS-3826.M

Automotive discharge hose in a car’s air conditioning (A/C) system is a vital component that facilitates the movement of high-pressure refrigerant from the compressor to the condenser. Here’s a brief overview of its role, functions, and maintenance:
Role and Functions

1. High-Pressure Transport: The discharge hose carries high-pressure, high-temperature refrigerant gas from the compressor to the condenser. This is crucial for the refrigeration cycle, as it helps release heat from the refrigerant.
2. Connection: It connects the compressor’s discharge port to the condenser, forming an integral part of the A/C system’s refrigerant circuit.
3. Prevention of Leaks: The hose is designed to withstand high pressure and temperature, preventing leaks and ensuring efficient refrigerant flow through the system.

1. Regular Inspection: Periodically check the discharge hose for signs of wear, damage, or degradation, such as cracks, bulges, or leaks. Inspect both the hose and its connections.
2. Check for Leaks: Look for any refrigerant leaks around the discharge hose. Leaks can lead to reduced A/C performance and loss of refrigerant.
3. Ensure Proper Installation: Ensure that the hose is properly secured and connected. Loose or improperly connected hoses can lead to system inefficiency and leaks.
4. Avoid Overheating: Ensure that the hose is not exposed to excessive heat sources or conditions that could cause it to deteriorate prematurely.
5. Professional Service: During routine A/C maintenance, have a professional technician inspect and service the discharge hose. They can check for proper function and replace the hose if necessary.

1. Locate the Hose: The discharge hose is usually found running between the A/C compressor and the condenser, often at the front of the engine bay.
2. Inspect the Hose: Look for any visible signs of damage, such as cracks, bulges, or abrasions. Check the hose fittings and connections for tightness and integrity.
3. Check for Leaks: Use a leak detection method, such as a UV dye or electronic leak detector, to identify any refrigerant leaks around the hose.
4. Secure and Replace: Ensure the hose is properly secured. If the hose is damaged or leaking, replace it with a new one that meets manufacturer specifications.
5. Verify System Operation: After maintenance or replacement, test the A/C system to ensure it operates correctly and efficiently.

1. 高压输送：排气管将高压、高温的制冷剂气体从压缩机输送到冷凝器。这对于制冷循环至关重要，有助于将制冷剂中的热量释放出去。
2. 连接：它连接压缩机的排气口与冷凝器，构成空调系统制冷剂循环的重要部分。
3. 防止泄漏：排气管设计用于承受高压力和高温，防止泄漏，确保制冷剂在系统中的高效流动。

1. 定期检查：定期检查排气管是否有磨损、损坏或老化的迹象，如裂纹、鼓包或泄漏。检查管道及其连接处。
2. 检查泄漏：检查排气管周围是否有制冷剂泄漏。泄漏会导致空调性能下降和制冷剂流失。
3. 确保正确安装：确保管道正确固定和连接。松动或连接不当的管道会导致系统效率下降和泄漏。
4. 避免过热：确保管道不暴露在过高的热源或会导致其过早老化的条件下。
5. 专业服务：在例行空调维护时，请专业技术人员检查和服务排气管。他们可以检查管道的正常功能，并在必要时更换管道。

1. 定位管道：排气管通常位于空调压缩机和冷凝器之间，通常在发动机舱前部。
2. 检查管道：检查是否有明显的损坏迹象，如裂纹、鼓包或磨损。检查管道接头和连接处的紧固情况。
3. 检查泄漏：使用泄漏检测方法，如紫外线染料或电子泄漏检测器，识别管道周围的制冷剂泄漏。
4. 固定和更换：确保管道正确固定。如果管道损坏或泄漏，使用符合制造商规格的新管道进行更换。
5. 验证系统运行：在维护或更换后，测试空调系统以确保其正常高效运行。