%READY STOCK %PROTON WIRA 1.5 / 1.6 ND LIQUID TUBE (2440) (JOINT-DRIER) HS-3308.M

Liquid Tube/Liquid Pipe in Car Air Conditioning (A/C) System
Role and Functions

1. Refrigerant Transport: The liquid tube, also known as the liquid line, carries high-pressure liquid refrigerant from the condenser to the expansion valve or orifice tube. It is essential for moving the refrigerant through the A/C system.
2. Heat Dissipation: As the refrigerant flows through the liquid tube, it releases heat absorbed in the condenser, allowing it to cool down before it reaches the expansion valve.
3. Pressure Regulation: The liquid tube helps maintain the proper pressure levels within the A/C system, ensuring efficient refrigerant flow and optimal system performance.

1. Regular Inspections: Periodically inspect the liquid tube for signs of wear, damage, or leaks. Look for cracks, corrosion, or any unusual signs that might indicate a problem.
2. Cleanliness: Keep the liquid tube and surrounding components clean to prevent dirt and debris from causing damage or obstructing the refrigerant flow.
3. Proper Fitting: Ensure that the liquid tube is properly connected and fitted to the condenser and expansion valve or orifice tube. Loose or improperly connected tubes can lead to leaks and reduced efficiency.
4. Check for Leaks: Use a UV dye or electronic leak detector to check for refrigerant leaks in the liquid tube. If a leak is detected, have it repaired immediately to prevent loss of refrigerant and damage to the A/C system.
5. Monitor Performance: Pay attention to the performance of the A/C system. If you notice reduced cooling efficiency, strange noises, or unusual odors, inspect the liquid tube as part of your troubleshooting process.
6. Professional Maintenance: Schedule regular maintenance with a qualified technician to inspect and service the entire A/C system, including the liquid tube. Professional maintenance ensures that any issues are detected and addressed early.

1. Visual Inspection: Regularly inspect the liquid tube for visible damage, wear, or leaks. Look for cracks, corrosion, and signs of refrigerant leakage.
2. Clean Surrounding Area: Keep the area around the liquid tube clean and free from debris to prevent contamination and damage.
3. Secure Connections: Ensure that all connections are tight and secure. Check the fittings at both the condenser and expansion valve or orifice tube ends.
4. Leak Detection: Use a UV dye or electronic leak detector to check for refrigerant leaks. Address any leaks promptly by repairing or replacing the liquid tube.
5. Monitor A/C Performance: Regularly monitor the A/C system's performance. Reduced cooling efficiency or unusual noises may indicate a problem with the liquid tube or other components.
6. Professional Check-ups: Have the A/C system professionally inspected and serviced at recommended intervals. A qualified technician can identify and fix issues that may not be visible during a visual inspection.

1. 制冷剂运输：液管，也称为液体管，将高压液态制冷剂从冷凝器输送到膨胀阀或节流管。它对于制冷剂在空调系统中的流动至关重要。
2. 热量散发：当制冷剂流经液管时，它会释放在冷凝器中吸收的热量，使其在到达膨胀阀之前冷却下来。
3. 压力调节：液管帮助维持空调系统内的适当压力水平，确保制冷剂流动顺畅和系统性能最佳。

1. 定期检查：定期检查液管是否有磨损、损坏或泄漏的迹象。查找裂缝、腐蚀或其他异常情况。
2. 保持清洁：保持液管及其周围部件的清洁，以防止污垢和碎片造成损坏或阻碍制冷剂流动。
3. 正确连接：确保液管与冷凝器和膨胀阀或节流管的连接正确且牢固。松动或连接不当的管道会导致泄漏和效率降低。
4. 检查泄漏：使用紫外线染料或电子泄漏检测器检查液管是否有制冷剂泄漏。如果发现泄漏，立即修理以防止制冷剂流失和空调系统损坏。
5. 监测性能：注意空调系统的性能。如果发现制冷效率降低、奇怪的噪音或异味，请在排查过程中检查液管。
6. 专业维护：安排专业技术人员定期维护，检查和服务整个空调系统，包括液管。专业维护可以确保及时发现和解决问题。

1. 目视检查：定期检查液管是否有明显的损坏、磨损或泄漏迹象。查找裂缝、腐蚀和制冷剂泄漏的迹象。
2. 清洁周围区域：保持液管周围区域清洁，防止污染和损坏。
3. 确保连接牢固：确保所有连接都紧固且牢固。检查冷凝器和膨胀阀或节流管端的接头。
4. 泄漏检测：使用紫外线染料或电子泄漏检测器检查制冷剂泄漏。及时修复或更换有问题的液管。
5. 监测空调性能：定期监测空调系统的性能。制冷效率降低或异常噪音可能表明液管或其他组件存在问题。
6. 专业检查：按照建议的间隔进行专业检查和维护。认证技术人员可以识别和修复在目视检查中可能未发现的问题。