Description
The Extralite CyberFront SPD-3
A straight pull front hub designed for road racing and cyclocross. The CyberFront comes with an external bearing preload system. The precise bearing setting ensures a low friction and no-play at the rim. The hub is equipped with drillngs for straight pull spokes - straight pull spokes increase the wheel stiffness under load and reduce lateral flex while increasing the disc braking torque transmission. Compared to the previous model the SPD-3 comes with a more equalized spoke camber on each side and can now handle higher spoke tensions. Furthermore it is not needed anymore to open the hub for wheel building or spoke replacement.
Extralite CyberRear SPD-3 Rear Hub - 6-Bolt - 12x142mm - Shimano HG
A straight pull rear hub designed for road racing and cyclocross. The CyberRear comes with an external bearing preload system. The precise bearing setting ensures a low friction and no-play at the rim. The hub is equipped with drillngs for straight pull spokes - straight pull spokes increase the wheel stiffness under load and reduce lateral flex while increasing the disc braking torque transmission. Compared to the previous model the SPD-3 comes with a more equalized spoke camber on each side and can now handle higher spoke tensions. Furthermore it is not needed anymore to open the hub for wheel building or spoke replacement.
Please Note: CyberRear freewheel mechanisms are suitable for road and cyclocross use (not MTB). The minimum gear ratio is 1.00. Shorter ratios may result in high torque and damage freewheel mechanism.
PRODUCT FEATURES
CyberFront:
- made of AL 7075 TX & grade 5 titanium
- 24holes
- weigh from 66g
- compatible with 100mm TA 12mm forks and 100mm QR, convertible
- Enduro bearing 440-stainless
- Axle Construction: Multishaped 17mm, milled to micro tolerances
- Finishing: Black anodized body, "hart-coated" axle-ends
- Micro-Tuner: The quickest bearing preload system
- Graphics: Laser etched
CyberRear:
- made of AL 7075 TX & grade 5 titanium
- 24holes
- weigh from 136g
- Width: 135mm (quick release) and 142mm (Thru axle 12mm) frames
- compatible with Shimano Road 8, 9, 10, 11 and 12speed
- Enduro bearing 440-stainless
- Axle Construction: Multishaped 17mm, milled to micro tolerances
- Body Construction: 3D multiaxial machining all in 1 stage
- Finishing: Black anodized body, "hart-coated" axle-ends
- Micro-Tuner: The quickest bearing preload system
- Freewheel: Hyper engineered 2pawls OR-Drive
- Ratchet: 32T Titanium engaging system
- Graphics: Laser etched
More detail about Official Cycling Partner Sdn Bhd
