Sonel P-6 Two-Pole Voltage Tester

Sonel P-6 Two-Pole Voltage Tester

Category: Voltage Testers Available
For more information, visit our official website at mysonel.com

Description

Sonel P-6 Two-Pole Voltage Tester
INDEX CAT. WMGBP6
EAN 5907624014572

Ingress protection: IP 66
Measurement category: CAT III 1000 V, CAT IV 600 V
Display: monochrome, backlit, segmented
 

Description
 

Ergonomics, durability, reliability

The Sonel P-6 bipolar voltage indicator is a reliable, extremely durable and safe tester, which allows to check voltage, continuity of circuit and phase sequence. It is designed to operate in the harshest environments, both industrial and commercial. Advanced technology, high level security and ease of use are the key features of the P-6.

Main functions and attributes of the P-6 instrument

  • phase identification - unique feature in voltage indicators worldwide
  • automatic voltage test up to 1000 V AC/DC
  • optical indication by a LED bar and additional LCD display
  • sound indication when dangerous voltage levels of 50 V AC and 120 V DC are exceeded
  • RCD trip test with switchable load
  • automatic continuity test upon connection to the object
  • 2-pole test of phase rotation direction
  • single-pole indication of 100 V presence
  • resistance measurement up to 1999 Ω
  • HOLD function for freezing the measurement results
  • robust, two-component housing protecting from mechanical damages and impacts
  • integrated torch light and backlit display for tests in poorly lit areas
  • IP65 ingress protection guarantees protection against dust and water
  • safety provided by measuring class compliant with CAT IV 600 V and CAT III 1000 V standards

Residual-current device trip testing

In response to the needs of clients, our new P-line voltage testers allow to check the RCD in a fully controllable way. With buttons on both probes, the user can reduce the internal impedance of the instrument, which makes it possible to trip the RCD. Additionally, pressing both buttons activates an additional loadpoint - a vibration motor. In this way, voltage can be measured in a tested circuit with no impact of stray currents on the result.

Durability and comfort of use

The housing has been designed for use in harsh industrial environments, where the application of personal protection equipment, such as voltage insulation safety gloves, is required. At the same time, the instrument’s ergonomic shape allows for one hand use.

Versatility and safety

Voltage testers are provided with a set of test probes. The probes reduce metal exposure to 4 mm length, which eliminates the risk of accidental contact with the wrong conductor when performing measurements on a wire harness. Additional screw-on metal adapters are used for applications where tips with 4 mm diameter are required. It is particularly important for tests in electrical sockets, where the user must be sure that contact between the probe and the conductor is kept. All elements of the set are stored in a special case so the probe tips can be replaced when needed. The case also includes an adapter that is helpful for unlocking the UK-type sockets.
 



Technical data

Specifications
 
Parameter Description
measurement category CAT III 1000 V / IV 600 V
range of voltage 6,0 …. 1000 V AC/DC
LED bar 7 segments
backlit LCD display
continuity test
10 mA / 30 mA RCD trip test
built-in torch light
single-pole phase tester
2-pole phase rotation tester
IP65 protection class
resistance test
freeze display
phase identification
insulation type acc. to EN 61010-1 double-insulation, class II
instrument power supply 2 x LR03 AAA 1.5 V (recommended alkaline cells)
operating frequency range 16…400 Hz
min. recovery time after operating for 30 s 240 s
continuity test: light and sound signal for R ≤ 400 kΩ
range of resistance measurement 1…1999 Ω
input impedance approx. 300 kΩ
range for single-pole phase indicator 100…1000 V
min. activation voltage ±6 V AC/DC
operating temperature -15…+55°C | 5…131°F
storage temperature -20…+70°C | -4…+158°F
max. humidity 95%
max. operating altitude 2000 m | 6562 ft
auto-off time 10 s / 30 s (HOLD mode)
display LCD, 3½ digits, 1999 read-out with function indicators
electromagnetic compatibility in accordance with standards EN 61326-1, EN 61326-2-2
conformance with the requirements of standards EN 61010-1, EN 61243-3
quality standard ISO 9001

Weight and dimensions
 
Parameter Value
Net weight (kg) 0.3
Package weight (kg) 0.4
Package width (cm) 5.5
Package height (cm) 33
Package length (cm) 9

More detail about Sonel
Sonel
Sonel Measuring Instruments Malaysia, Electrical Test Equipment, Thermovision Cameras ~ Sonel
Contact Us flagMalaysia