G3 Extra Plus Abrasive Compound is a high quality, step 1 product for the removal of P1500 or finer sanding marks from all modern paint systems.
For best results, compound at 900 - 1300rpm using either a G Mop Yellow Compounding Foam or the more expensive, but higher performing, G Mop High Cut Foam.
Follow with G3 Fine Finishing Compound and a G Mop Finishing Foam to remove any swirls and holograms that might remain, to leave a heightened gloss finish.
- Permanent Results Fast No Fillers
- Good Gloss
- Clean
- Easy Off
G3 Fine offers rapid removal of minor surface defects and swirl marks from all modern paint systems. Superb on darker colours.
G3 Fine is ideally applied using a Farécla G Mop Finishing Foam, which was engineered in tandem with the compound to provide optimum performance.
Fast Scratch Removal - Removes P3000 or finer sanding marks
Swirl Remover - Swirls and holograms eliminated permanently
Surface Restorer - Restores lightly oxidised paint work and dull surfaces
Versatility - Can be uséd by machine with foam or lambswool applicator as well as by hand
Dry Use & Clean to Use - Easy clean up, minimal splatter or dusting
More detail about Cheong Seng Hardware Sdn Bhd
Malaysia
