Features：
• Vacuum power with adjustable aspiration rate to achieve up to 15mL/S
• Sensitive level sensor to detect when the bottle is full preventing liquid overflow
• Fully autoclavable all system components that contact liquid
• Easy to disassemble and clean
• Wide range of adapters fit on the hand operator for aspirating liquids from
tubes, dishes, microplates, bottles, from single channel to 8-channel tip
• Hydrophobic filter for avoiding air contamination or liquid overflow (this feature is in the catalogue but it is not on website)
Sensitive level sensor to prevent liquid overflow
Self-closing connectors to avoid escape of drops or aerosols from disconnected bottle
Stand for transferring the bottle securely and holding the hand operator
Parameter:
|
Model |
SAFEVAC |
|
Cat No. |
7035100000 |
|
Vacuum range |
0-600mbar |
|
Dimension[W×D×H] |
180×240×450mm |
|
Aspirating speed |
1-15mL/S |
|
Autoclave component |
tube; waste bottle; operation handle; |
|
Noise Level |
≤55dB |
|
Weight |
3kg |
|
Power Supply |
100~240VAC, 50/60 Hz |
|
Bottle Volume |
4L |
|
Package Size(W*D*H) |
570*420*220mm |
|
Gross Weight |
4.12kg |
Wide range of adapters fit well with tube, microplate and disk plate for various of tasks, all of which can be fully autoclaved ( At 121℃ 1 bar for 20 minutes. After autoclaving the equipment must be cooled down before use ).
|
A |
8-channel tip detrusion adapter 200ul tip |
|
B |
8 channel needleφ1.5mm |
|
C |
Single needleφ2.5mm, 40mm |
|
D |
Single needleφ2.5mm, 120mm |
|
E |
Single needleφ1.5mm, 40mm |
|
F |
Single needleφ1.5mm, 120mm |
|
G |
Tip detrusion adapter 200ul tip |
|
H |
Tip detrusion adapter 1ml tip |
|
I |
SAFEVAC Handle bracket |
