**READY STOCKS** 4.5KG Pentens Waterplug T-800 Powder Waterproof Cement 快干堵漏防水灰粉 !!!

**READY STOCKS** 4.5KG Pentens Waterplug T-800 Powder Waterproof Cement 快干堵漏防水灰粉 !!!

Category: QingLong - Waterproofing Available (Qty:8)
RM 58.00 For more information, visit our official website at yonghupheng.com

Description

PENTENS T-800 is a ready to use rich blend of special cements and chemical in single part dry powder form needing only the addition of clean water to produce an ultra fast setting mortar.
PENTENS T-800是一种随时可用的特殊水泥和化学品的丰富混合物,呈单组分干粉形式,仅需添加净水即可生产超快凝结砂浆。

ADVANTAGES
- Easy to use (DIY)
- Non-shrink
- Non-toxic
- Rapid strength development
- Extended working time
- Good adhesive properties
- Excellent bond strength
- Iron and chloride free
- Low permeability
- Dense
好处
-易于使用(DIY)
- 不缩水
-无毒
-快速的力量发展
-延长工作时间
-良好的粘合性能
-优异的粘合强度
-不含铁和氯化物
-低渗透性
-密集


USES
PENTENS T-800 is suitable for the patching works with clearance of 5mm or more, such as:
- Stopping leaks
- Pointing and caulking
- Joint
- Patching mortar and concrete
- Cavities
- Gaps
- Recesses
- Repairing honeycombs
- Anchoring of bolts and brackets
用途
PENTENS T-800适用于间隙为5mm或更大的修补工作,例如:
-阻止泄漏
-指向和填隙
- 联合的
-修补砂浆和混凝土
-腔
-缺口
-凹进
-修复蜂窝
-螺栓和托架的固定

APPLICATION
Surface Preparation
Concrete surfaces should be clean, sound and free from oil, grease, laitance and loosely adhering particles.
Areas to be patched should be cut back to a minimum depth of 15 mm. Where possible dovetail back the edge, do not featheredge.
表面处理
混凝土表面应清洁,完好,无油,油脂,浮油和松散粘附的颗粒。
需修补的区域应减少到最小15毫米的深度。如有可能,请在边缘边缘做燕尾榫加工,切勿羽化。

Mixing
PENTENS T-800 is added to clean wate and mixed either with a trowel or gloved hand.
Mixing Ratio (by weight)
PENTENS T-800 (Powder) : 5
Clean Water: 1
添加PENTENS T-800来清洁水,并用抹子或戴手套的手混合。
混合比(重量比)
彭特斯T-800(粉):5
净水:1

Application
After mixing, timing is important because of the rapid set the placement time is limited to the gelling period of about 2 minutes. Use hand as necessary until it has achieved initial set.
应用
混合后,时间安排很重要,因为快速设置,放置时间仅限于约2分钟的胶凝时间。根据需要使用手直到达到初始设定。

Color
Grey

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
自取请选择 For SELF PICK UP : -

- CHOOSE "Others (West Malaysia)"
- Proceed payment & get your product at the following address

永合兴五金机械
YONG HUP HENG MACHINERY HARDWARE
+6018 9644 365
180 & 182, Jalan Layang 16, Taman Perling 81200 JB Johor

More detail about Yong Hup Heng Machinery Hardware (M) Sdn. Bhd.
Yong Hup Heng Machinery Hardware (M) Sdn. Bhd.
Yong Hup Heng Machinery Hardware (M) Sdn. Bhd. Hardware Store JB, Power Tools Supplier Johor Bahru, Paint Supply Malaysia ~ Yong Hup Heng Machinery Hardware (M) Sdn. Bhd.
Contact Us flagMalaysia