SIGNAL WORD WARNING
HAZARD STATEMENTS
- H315 Causes skin irritation
- H319 Causes serious eye irritation
PRECAUTIONARY STATEMENTS
- P101 if medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children
- P103 Read label before use
- P264 Wash thoroughly after handling
- P280 Wear protective gloves/eye protection/face protection
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes
- Remove contact lenses, if present and easy to do. Continue rising
- P332+P313 If skin irritation occurs: Get medical advice/attention
- P362+P364 Take off contaminated clothing and wash it before reuse
- P337+P313 If eye irritation persists: Get medical advice/attention
NOTE:
This sealant is commonly recognized by its strong vinegar-like smell. It will absorb water from air to release the acetic acid gas during the curing process
WS-601W is a one-component, general purpose acetic silicone sealant.
APPLICATION:
-Suitable for use for a wide range of substrates such as glass, stainless steel, aluminum, wood, ceramic, dark stone and PVC plastic.
-Not recommended for concrete and copper alloy.
-Interior and exterior use.
-Widely used in building & private house decoration for joints adhesion and sealing where high quality sealant is needed.
SPECIFICATION:
Colour: Black / White / Clear
Size: 240ml
Package Dimension : 22cm (H) x 8cm (W) x 8cm (L)
Net Weight: 0.281kg
DIRECTION:
-Surface must be clean, dry and clean.
-Surfaces should be cleaned with alcohol M.E.K or other suitable solvent. Do not use soap or detergent.
-Use masking tapes for better appearance before application and remove masking tape before sealant skins.
-Cut nozzle as desired and apply evenly with cartridge gun.
SHELF LIFE & STORAGE:
Store in dry and cool place, below 30c. Use within 18 months from date of production.
