SEIKO PP INK 710燘LACK

Ink type:     Two(2)-part reaction acrylic ink.
Feature:     Gloss finish, excellent in leveling.
                   HF GV3 RX01 Series can adhere to glass at low temperature and keep up with the physicality test of
                   every kind.
Diluents :    Standard solvent T-980

Wash-up solvent: T-31
Screen mesh: T250~T420/inch fabric are recommended .
Mixing ratio:  HF GV3 RX01 710 black and other colors: A hardener :Care183=100:15:2
                     HF GV3 RX01 120: A hardener: Care183=100:10:2
Drying:          Baking: 120℃x30min. is recommended

Note:   
餷               1. Drying more than 40min at 120℃ may help to improve alcohol resistance.
餷               2. Please follow the ratio of additive and adjust viscosity with diluents. Once ink is mixed HF GV3 RX01 
                      and additives, the ink will get thicker about 3 hours at room temperature, so, please diluent.
餷               3. 1% addition of Care111 to the ink may help to improve the foaming printing problems.
餷               4. When HF GV3 RX01 Series lose its performance because of the influence of environment and time,
                      please add 1% of Care183.
餷               5. Pot-life is approximately 7 hours. So, please do not use after 7 hours
餷               6. Please check the performance under long storage.