X-Ray Stainless Steel Channel Hanger
Perforated Hangers – available as full range below* – perforated channels allow excess
fluid to drain away more easily.
Channel Hangers are manufactured from stainless steel and depending on the size of
films to be processed the channel hanger will accommodate one to four films at a time.
The film(s) are slid into the two channelled sides and bottom , the top flap is positioned
and the film is then held secure and ready for use. The top bar of the channel hanger
sits on the top edge of the processing tank with the films suspended in the processing chemicals.
Material: Stainless Steel 304
Material Thickness: 0.6 mm
Solder Point : Spot Welding
Size: Customer made different Sizequot
|
Model No. |
Size cm |
Film number |
|
RHG624 |
6 x 24 |
(4 Films) |
|
RHG648 |
6 x 48 |
(4 Films) |
|
RHG740 |
7 x 40 |
(4 Films) |
|
RHG748 |
7 x 48 |
(4 Films) |
|
RHG912 |
9 x 12 |
(3 Films) |
|
RHG1024 |
10 x 24 |
(3 Films) |
|
RHG1040 |
10 x 40 |
(3 Films) |
|
RHG1048 |
10 x 48 |
(3 Films) |
|
RHG1318 |
13 x 18 |
(2 Films) |
|
RHG1540 |
15 x 40 |
(2 Films) |
|
RHG1824 |
18 x 24 |
(1 Film) |
|
RHG1843 |
18 x 43 |
(1 Film) |
|
RHG2430 |
24 x 30 |
(1 Film) |
|
RHG3040 |
30 x 40 |
(1 Film) |
|
RHG3543 |
35 x 43 |
(1 Film) |
|
Model No. |
Product Description |
|
RHG-100 |
Channel Hanger 3-1/2"x10",3 in 1 |
|
RHG-110 |
Channel Hanger 3-1/2"x12",3 in 1 |
|
RHG-120 |
Channel Hanger 3-1/2"x17",3 in 1 |
|
RHG-130 |
Channel Hanger 4 "x10 ",3 in 1 |
|
RHG-140 |
Channel Hanger 4"x12",3 in 1 |
|
RHG-150 |
Channel Hanger 4 "x15",3 in 1 |
|
RHG-160 |
Channel Hanger 4"x17",3 in 1 |
|
RHG-170 |
Channel Hanger 4-1/2 "x10",2 in 1 |
|
RHG-180 |
Channel Hanger 4-1/2"x12",2 in 1 |
|
RHG-190 |
Channel Hanger 4-1/2 "x15",2 in 1 |
|
RHG-200 |
Channel Hanger 4-1/2 "x17",2 in 1 |
