Miller Multimatic 235 Multiprocess Welder w/ EZ-Latch!" Running Gear

Miller Multimatic 235 Multiprocess Welder w/ EZ-Latch!" Running Gear

Category: Miller Welding Machine Available
Purchasable on official site
For more information, visit our official website at kyusenhycon.com

Description

MULTIPROCESS WELDERS

Model: Multimatic 235 EZ-Latch (Single Cylinders Running Gear Package)

The Miller® Multimatic® 235 with EZ-Latch™ single cylinder running gear is a 235 amp, portable multi-process welder that is capable of MIG, Flux-cored, DC stick, DC Lift-Arc™ TIG and Pulsed TIG welding. It is the first-ever Miller welder that functions with any OPTIONAL Miller Spoolmatic® or Spoolmate™ spool gun. For Spoolmate 200 and all Spoolmatic models, Auto-Gun Detect® automatically detects which gun (MIG or Spool) is being used and allows you to switch between MIG gun and spool gun by simply pulling the trigger. Spoolmate 100 and Spoolmate 150 spool guns can also be used with the Multimatic 235, but the Auto-Gun Detect® feature will not work with these spool gun models. Both the Spoolmate 100 and 150 need to be plugged into the 235's MIG gun receptacle in order to function properly.

The Multimatic® 235 comes complete with full color 4.3 inch LCD screen with Auto-Set™ Elite technology. Auto-Set™ Elite sets MIG, Stick and DC TIG welding parameters automatically, all you need to do is enter metal thickness and welding wire or tungsten electrode diameter. The 235 also features a built in program for stainless steel MIG welding that uses Argon 98%/CO2 2% as the shielding gas. This will save hundreds of dollars per cylinder over using helium mix shielding gases for your stainless steel MIG applications.

EZ-Latch™ running gear with single cylinder rack gives unmatched portability to the Multimatic 235. For moving around the shop, your 235 welder attaches to the running gear through a series of four, quick-disconnect latches. For times when your 235 is taken into the field, the machine and running gear can be quickly separated for loading into a vehicle. The 235 can also be separated from the EZ-Latch running gear to access difficult-to-reach areas around the shop where a welder with full running gear/cylinder rack might not otherwise fit.

NOTE: EZ-Latch™ running gear comes in separate box and requires some assembly. Components assemble in four steps and include: cart with front caster wheels, single cylinder tray with rear wheels, single cylinder post and gun & cable rack.

The Multimatic® 235 runs on 240V single-phase input power. It comes complete with MDX™-250 MIG gun, electrode holder, clamp, flow gauge regulator and gas hose, reversible drive rolls, extra contact tips and material thickness gauge.

FEATURES


 
Multimatic® 235 Multiprocess Welder w/ EZ-Latch™ Running Gear
   Industries Interests Racing, Farm and Ranch,
Auto Repair, Manufacturing,
Construction and Fabrication
   Amperage 20 A - 235 A
   Material Thickness Mild Steel 24 ga. - 3/8 in. (TIG)
Mild Steel 24 ga. - 3/8 in. (MIG)
Mild Steel 16 ga. - 3/8 in. (Stick)
Aluminum 18 ga. - 3/8 in (MIG)
   Weldable Metals Aluminum,
Stainless Steel, Steel
   Input Voltage 208 V
220/230/240 V
   Input Phase 1-Phase
   Input Hz 50/60 Hz
   Current Type DC
   Max Open Circuit Voltage 54 VDC
   Wire Feed Speed 1.5 m/min - 15.2 m/min
60 m/min - 600 m/min
   Rated Output CV: MIG/Flux 170 Amps at 22.5 V, 60% duty cycle
CC: Stick 150 Amps at 26 V, 60% duty cycle
CC: DC TIG 180 Amps at 17.2 V, 60% duty cycle
   Welding Mode CC/CV
   Portability Handle(s) Running Gear
Cart (Standard)
   Weld Output CC / CV
   Applications Aluminum Welding, Fabrication,
Mobile Fabrication
MRO Welding Education and Training
Welding Projects
 

More detail about Kyusen Machinery & Construction Sdn Bhd
Kyusen Machinery & Construction Sdn Bhd
Kyusen Machinery & Construction Sdn Bhd Construction Machinery Rental Selangor, Air Compressor Supplier Kuala Lumpur (KL), Generator Supply Malaysia ~ Kyusen Machinery & Construction Sdn Bhd
Contact Us flagMalaysia