About CNC TILTING ROTARY TABLE GFA-101S/GFA-125S/GFA-170S/GFA-210S
| MODEL SPECIFICATIONS | UNIT | GFA-101S | GFA-125S | GFA-170S | GFA-210S | ||||
| Worktable Bore Diameter | mm/inch | Ø100/Ø3.94 | Ø125/Ø4.92 | Ø170/Ø6.69 | Ø210/Ø8.27 | ||||
| Center Bore Diameter | mm/inch | Ø30H7 / Ø1.18H7 | Ø30H7 / Ø1.18H7 | Ø40H7 / Ø1.57H7 | Ø65H7 / Ø2.56H7 | ||||
| hHeight Of Table (Horizontal) | mm/inch | 205 / 8.07 | 224.5 / 8.84 | 260 / 10.24 | 280 / 11.02 | ||||
| Height Of Center (Vertical) | mm/inch | 135 / 5.31 | 160 / 6.30 | 190 / 7.48 | 210 / 8.27 | ||||
| Width Of T-slot | mm/inch | 12H7 / 0.47H7 | 12H7 / 0.47H7 | 12H7 / 0.47H7 | 12H7 / 0.47H7 | ||||
| Width Of Guide Block | mm/inch | 18 / 0.71 | 18 / 0.71 | 18 / 0.71 | 18 / 0.71 | ||||
| Clamping Method/Pressure | Mpa/psi | Pneumatic | Pneumatic | Pneumatic | Pneumatic | ||||
| 0.55 ~ 0.7 / | 0.55 ~ 0.7 / | 0.55 ~ 0.7 / | 0.55 ~ 0.7 / | ||||||
| 79.8 ~ 101.5 | 79.8 ~ 101.5 | 79.8 ~ 101.5 | 79.8 ~ 101.5 | ||||||
| Transmission Ratio | R | T | R | T | R | T | R | T | |
| 1:75 | 1:120 | 1:90 | 1:90 | 1:90 | 1:90 | 1:90 | 1:90 | ||
| Max. Table Speed | min-1 | 33.3 | 16.6 | 44.4 | 44.4 | 33.3 | 22.2 | 33.3 | 22.2 |
| Allowable Loading Capacity | kg/lb | 35/77 | 50/110 | 75/165 | 100/220 | ||||
| kg/lb | 20/44 | 35/77 | 50/110 | 70/154 | |||||
| Allowable Unblancing Work Moment | Nm/ft.lbs. | 24/17.69 | 24/17.69 | 40/29.5 | 62/45.7 | ||||
| Allowable Load (When Table Clamped) | N/lbs | 4000/897.60 | 4000/897.60 | 7000/1570.8 | 14000/3141.6 | ||||
| Nm/ft.lbs. | 200/147.4 | 140/103.2 | 300/221 | 400/294.7 | |||||
| Nm/ft.lbs. | 250/184.25 | 300/221.1 | 400/294.7 | 600/442 | |||||
| Allowable Loading Inertia | Kg.m2 | 0.044 | 0.1 | 0.28 | 0.55 | ||||
| Resolution | Kg | 0.001 | 0.001 | 0.001 | 0.001 | ||||
| Indexing Accuracy | deg. | 40" | 60" | 40" | 60" | 20" | 60" | 20" | 60" |
| Repeatability | sec | 6" | 8" | 6" | 8" | 6" | 8" | 6" | 8" |
| Tilting Angle Range | deg. | -17~+107 | -30~+120 | -30~+120 | -30~+120 | ||||
| Net Weight (Servo Motor Excluded) | kg/lb | 90/198 | 120/264 | 180/396 | 230/490.6 | ||||
| Allowable Cutting Torque | Nm/ft.lbs. | 85/62.65 | 85/62.65 | 200/147.4 | 250/184.25 | ||||
| Allowable Max. Rotary Joint Quantity | Port | - | 3 | 4 | 4 | ||||
.png)
More detail about IPM TECHNOLOGY SDN BHD
Malaysia
