Design: Electromechanical linear axis With ball screw
Type of motor: Stepper motor, Servo motor
Spindle type: Ball screw drive
Symbol: 00991211
Position detection: Via proximity switch, Via inductive sensors
Max. acceleration: 15 m/s²
Max. rotational speed: 4500 rpm
Max. speed: 0.6 m/s
Repetition accuracy: ±0.015 mm
Duty cycle: 100%
LABS (PWIS) conformity: VDMA24364 zone III
Suitability for the production of Li-ion batteries: Metals with more than 1% by mass of copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils
Cleanroom class: Class 7 according to ISO 14644-1
Storage temperature: -20 °C ... 60 °C
Degree of protectionI: P40
Ambient temperature: 0 °C ... 50 °C
Impact energy in end positions: 2.5E-4 J
Note on the impact energy in the end positions: At maximum homing speed of 0.01 m/s
2nd moment of area Iy: 38000 mm t
2nd moment of area Iz: 45000 mm t
Idle torque at vmax: 0.04 Nm
Idle torque at vmin: 0.02 Nm
Max. force Fy: 356 N
Max. force Fz: 356 N
Max. force Fy total axis: 150 N
Max. force Fz total axis: 300 N
Fy at theoretical life value of 100 km (only guide consideration): 1310 N
Fz at theoretical life value of 100 km (only guide consideration): 1310 N
Max. moment Mx: 1.3 Nm
Max. moment My: 1.1 Nm
Max. moment Mz: 1.1 Nm
Max. moment Mx total axis: 1.3 Nm
Max. moment My total axis: 1.1 Nm
Max. moment Mz total axis: 1.1 Nm
Mx at theoretical life value of 100 km (only guide consideration): 5 Nm
My at theoretical life value of 100 km (only guide consideration): 4 Nm
Mz at theoretical life value of 100 km (only guide consideration): 4 Nm
Distance between slide surface and guide centre: 31.4 mm
Max. radial force at drive shaft: 75 N
Max. feed force Fx: 40 N
Torsional mass moment of inertia It: 1700 mm t
Mass moment of inertia JH per metre of stroke: 0.02218 kgcm²
Mass moment of inertia JL per kg of working load: 0.016211 kgcm²
Mass moment of inertia JO: 0.00274 kgcm²
Feed constant: 8 mm/U
Reference service life: 5000 km
Maintenance interval: Life-time lubrication
Moving mass: 83.4 g
Additional weight per 10 mm stroke: 18 g
Dynamic deflection (moving load): 0.05% of the axis length, max. 0.5 mm
Static deflection (load in standstill): 0.1% of the axis length
Interface code, actuator: V25
Material end cap: Painted die cast aluminium
Material profile: Anodised wrought aluminium alloy
Malaysia
