Description

DREMEL 108 Engraving Cutter

To perform best results of Dremel 108 Engraving Cutter, Dremel recommend users:

• Insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
• Secure objects to a stable surface while working.
• Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
• Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
• If chattering occurs, increase speed. 

• Shank diameter: 3.2 mm
• Working diameter: 0.8 mm
• Maximum RPM: 35,000 1/min

We always try to keep the item in stock all times
=========================================
 
Order Method :
1. Place your order on our website
2. Via Email/ Whatsapp/ SMS/ Phone Call
3. Cash & Carry any of our branches (Self Collect allowed)
====================================================
 
Contact Information:
 
Balakong:
603-89623888 (whatsapp or call)
603-89617328 (whatsapp or call)
017-3691406,[email protected]
017-3691038,[email protected]
 
 
Kajang:
603-87366972 (whatsapp or call)
016-2338830, [email protected]
 

Setapak:
603-40219399 (whatsapp or call)
016-6613186(whatsapp), [email protected]
016-6616801, [email protected]
 
        
Gombak:
603-40318686 (whatsapp or call)
016-7166820, [email protected]
016-6616081, [email protected]
 
 
Titiwangsa:
603-40319292 (whatsapp or call)
016-866 6203, [email protected]
 

Sentul:
603-30062238 (whatsapp or call)
012-9380198, [email protected]
016-866 6230, [email protected]
 
 
Knight Auto Sdn Bhd (Since 1999)(476359-M)  
A Wholly-Owned Subsidiary of Lim Seong Hai Capital Berhad
http://www.knightauto.com.my
=========================================

More detail about Knight Auto Sdn Bhd