Description
RPS51 is a multiscale Rogowski coil integrator, in a compact DIN rail enclosure, powered directly from the mains.
An integrator is essential to equalize and shift by 90° the output signal from the Rogowski coils. It consists of an active electronic
circuit with negligible offset and a good linearity. RPS51 can be combined with any model and size of MFC series Rogowski coil.
The integrator is provided with a push button for an easy scale selection. Up to four input scales are available: 100, 500, 1000, 5000 A.
This provides a wide range of applications witgh a single coil and RPS51.
RPS51 and a Rogowski current transducer is a very flexible system, suitable for high power load analysis, impulsive current monitoring,
DC ripple measurement, etc. Ideal solution for standard 1 A input PMD’s.
TECHNICAL SPECIFICATIONS
Power supply
Type: Auxiliary
Range: 85 … 265 VAC, 50/60 Hz
Consumption: 6.5 VA typical, 20 VA max in overload condition
Safety: 300 V CAT III
Electrical characteristics
Input: 100mV/kA@50Hz (RMS values) with MFC140/MFC150 Rogowski coil
AC output: 1 A RMS @ selected full scale
Crest factor: 2
Selectable scales: Standard values: 100 A, 500 A, 1000 A, 5000 A
Bandwidth: 40 – 3200 Hz
Accuracy:
1.5% @ 5% full scale
< 1% @ full scale
Phase error:
< 0.1° with 40 … 150 Hz range
< 1° with 150 … 1000 Hz range
< 2° with 1000 … 3200 Hz range
Enviromental conditions
Operating temperature: -25 … +55°C
Storage temperature: -25 … +70°C
Mechanical characteristics
Material: Plastic enclosure
Protection degree: IP20
Size and weight: 115x100x23 mm, approx. 122 g
Installation and use: Indoor
Conformità
Directives: 2014/35/EU, 2011/65/EU
Safey: IEC/EN 61010-1:2010-10
EMC: IEC/EN 61326-1:2012
More detail about Hexo Industries (M) Sdn Bhd
Malaysia
