Description
PENTENS EASYSOV WP5
Synthetic Rubber Based Waterproof Thermal Insulation Coating
Pentens EasySov WP5+ is a state-of-the-art 5 in 1 multifunctional synthetic rubber-based waterproofing product. The use of ultra high-pressure water jet cutting process treated recycled rubber granules to replace the greater part of conventional fillers and aggregates in product formulation, up to 40% of total product weight, makes Pentens EasySov WP5+ an eco-friendly coating with extraordinary physical properties.
ADVANTAGES
- Good mechanical and chemical properties.
- Strengthen the water-resistance and anti-impact.
- Enable the filling element with good compatibility and dispersibility.
- Low bubbling.
- Anti-freezing.
- Less dusting.
- Superb adhesive strength.
- It can be applied directly on damp or wet surfaces.
- Flexural strength.
- Non-corrosive.
- Non-flammable.
- Non-toxic.
USES
Areas of application include
Sealing
- Cracks and joint on RC roof.
- Wall and ceiling.
Waterproofing
- Roof.
- Wall.
- Gutter.
- Zinc.
- Metal Roof.
- Planter Boxes.
SPECIFICATIONS
- Form: High viscosity paste
- Color: Greyish-white
- Resin: 100% acrylic
- Water Absorption (%): 0.78
- Solid Content (%): >80
- Elongation (%): >60
- Shelf Life: At least 1 year when unopened and undamaged
- Storage Condition: Store in a dry, cool place
- Packaging: 4kg/pail , 20kg/pail , 200kg/drum
APPLICATION
Substrate should be examined and primed with PENTENS T-007 primer. Brush at approximately 0.2kg/m2 depending on the type and surface condition of the substrate. For areas exposed to hot drying winds, 2 to 3 thin coats of paint would work better than 1 thick coat. Pentens EasySov WP5 is meant to be applied in two coats. Pentens EasySov WP5 can be installed using conventional airless spray equipment, trowel, brush or roller. Backrolling after spray application is strongly recommended to achieve uniform texture and film thickness.
SAFETY
Pentens EasySov WP5 is non-toxic. For personal precautions, wear gloves and goggles when handling Pentens EasySov WP5. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice if symptoms persist. If contact with skin occurs, it must be removed before curing takes place. Wash off with an industrial skin cleanser followed by plenty of soap and water. Do not use solvent. Ensure adequate ventilation when using these products.
More detail about PAINT MASTER SDN BHD
Malaysia
