The RA-A model is a semi-automatic machine for the wrapping of palletized loads with stretch film (auto attach & film cut): with the possibility of adjusting of film tension by motorized prestretch, gradual starting of turntable, manual or automatic cycle and possibility of adjusting the film pallet over-lap. The working cycle is started by pressing the START button. The arm starts to rotate and the first bottom film layers are applied. After some arm rotations, the film carriage rises. A photocell reads the maximum height of the load and stops the film carriage upward movement. After some wrapping rotations, the film carriage descends and the arm stops just the carriage reaches the lower part of load. The rotating arm stops in “ Fix Position Stop” at the end of the cycle.
Main Features
Max. pallet height: 2100 mm
Arm
Arm speed adjustable by inverter (6 -12 RPM) / Soft Start & Fix Stop
Cut & attach system of the film tail at the end of the working cycle
Carriage
Belt driven carriage
Film carriage with mechanical/electromagnetic clutch M or FM
Film carriage with motorized prestretch LP
Adjustable carriage speed by inverter
Model
RA-A
4 wrapping programs (up & down / up only / both with pause for top sheet)
Manual & automatic working modes
Photocell to detect pallet height
Pallet OVER-LAP and carriage stop delay set-up
Automatic "Fix Stop Position" (also manual mode)
Adjustable arm speed by inverter
Adjustable carriage speed by inverter
Top & bottom revolutions set-up
Additional wraps: carriage ascent time and revolutions set-up + top press control
Possibility to memorize up to 9 wrapping programs that can be recalled by pressing the wrapping program number
DLIS INDUSTRIAL SUPPLIES SDN BHDPackaging Machine & Tools Supplier Johor Bahru (JB), Conveyor System Supply Malaysia, Material Handling Equipment Supplies Selangor, Kuala Lumpur (KL) ~ DLIS INDUSTRIAL SUPPLIES SDN BHD
