INVERTEK DRIVES OPTIDRIVE CoolVert Series: Top Choice in Selangor, KL, Malaysia POWER DRIVE TECHNOLOGY SDN. BHD.

Description

High Performance Drive Specifically for BLDC Compressors, Heat Pumps & CDUs

Invertek’s high-performance OPTIDRIVE™ CoolVert; designed specifically for machine builders to optimise the performance of BLDC compressors used in Heat Pumps and Condensing Units (CDUs), improving overall system performance and lowering energy costs.

Features:
1. Open Connectivity & Easy Commissioning

Seamless connectivity with any application controller
Built in RS485 Modbus RTU
Bluetooth connectivity available via Optistick Smart
External TFT keypad available
Drive status LEDs

2. Environmental

Compact design with through panel mounting
Wide operating temperature: −20贑 to 60贑
IP20 rated front enclosure, IP55 at the rear
Coldplate version available
Coated PCBs meet class 3C2 in accordance with EN60713-303
Built-in EMC filter class C1 in accordance with EN61800-3-2004
Low harmonic design compliant with; EN61000-3-2, (1 phase 200-230V input), and EN61000-3-12, (3 phase 380-480V input).

3. Supply voltages and output current range

1 x 200–240V (± 10%): 7.0A, 12A, 16A, 20A All single phase drives with active PFC
3 x 380–480V (± 10%): 14A, 18A, 24A

4. Selectable motor types

AC Induction (IM)
AC Permanent Magnet (PM)
Brushless DC (BLDC),
Synchronous Reluctance (SynRM)
Line Start Permanent Magnet (LSPM)

5. Control Terminals

Pluggable control and communication terminals
STO SIL3 Safe Torque Off for system protection, TUV approved
Programmable, predefined input and output functions:

Start / Stop (Enable / Disable)
PTC motor thermal protection (0-10V, 4-20mA)
Relay (drive healthy / trip)

6. Through Panel Mounting

Reduces panel size
Improves thermal management
Supports improved IP ratings for electronics
Cold-plate version also available

7. Safe Torque Off (STO)

Lower Harmonics compliant with:

EN 61000-3-2: 1-phase Input Drives
EN 61000-3-12: 3-phase Input Drives

Technical Specifications:

Input Ratings	Supply Voltage	200 – 240V ± 10% 380 – 480V ± 10%
	Supply Frequency	48 – 62Hz
	Displacement Power Factor	> 0.98
	Phase Imbalance	3% Maximum allowed
	Inrush Current	< rated current
Output Ratings	Output Power	200V: 7.0A to 20A 400V: 14A to 75A
	Overload Capacity	130% rated current for 10s
	Output Frequency	0 – 500Hz
	Acceleration Time	0.01 – 600 seconds
	Deceleration Time	0.01 – 600 seconds
	Typical Efficiency	> 98%
Ambient Conditions	Temperature	Storage: -40 to 60°C Operating: -20 to 50°C
	Altitude	Up to 1000m ASL without derating Up to 2000m maximum
	Humidity	95% Max, non condensing
	Vibration	Conforms to EN61800-5-1
Enclosure	Ingress Protection	Front IP20 Rear (Through Panel Mounting) IP55
Enclosure	Coated PCBs	Designed for operation in 3S2/3C2 environments according to IEC 60721-3-3
Programming	Modbus RTU (RS485)	Modbus RTU / CAN through terminals and RJ45 port.
	PC Tools	PC Tools software for Diagnostics and parameter configuration (RJ45 port only).
	Keypad	Optional Remote Keypad with TFT display for diagnostic and programming
	Smartphone app	Optitools Mobile
Control Specification	Control Method	Modbus RTU (RS485) Terminal Control Digital / Analogue Terminal Control PI mode Master / Slave Mode
	PWM Frequency	4 – 32kHz
	Stopping Mode	Ramp to stop, Coast to stop
	Control Modes	Modbus RTU (RS485) Terminal Control Digital / Analogue Terminal Control PI mode Master / Slave Mode
	Skip Frequency	2 skip frequencies, user adjustable
Safe Torque Off (STO)	IEC 61800-5-2:2016	SIL 3
	UL 61800-5-2 : 2022	SIL 3
	Independent Approval	TUV Rheinland / UL

More detail about POWER DRIVE TECHNOLOGY SDN. BHD.