Non-Explosive Cracking Agent for Breaking Up Rock & Concrete "Betonamit"

Non-Explosive Cracking Agent for Breaking Up Rock & Concrete "Betonamit"

Category: Chemical/etc Available
For more information, visit our official website at kyusenmachinery.com.my

Description

EXPLOSION-FREE & SAFE

Betonamit® – The explosion-free demolition agent
Simple. Effective. Environmentally-Friendly

Betonamit type R (liquid)
Betonamit is an explosion-free demolition agent which enables relatively accurate demolitions without the need
for special conditions or equipment. It has a very good shelf life of at least 3 years. After a reaction time of only
a few hours Betonamit develops an enormous expansion pressure, which is soon so powerful that every hard rock
and even reinforced concrete is broken apart. Compared to other conventional demolition methods, Betonamit
works virtually silently, vibration-free and environmentally-friendly
.

Betonamit type S (putty-like)
Betonamit Type S is used primarily for overhead work, as well as for horizontal or hard-to-reach drill holes.
The preparatory work and technical data for Betonamit type S corresponds to that of type R. The only and
definitive difference is that, after the mixing process, the Betonamit presents itself as a kneadable mass.
This mass is then shaped by hand into sausage forms and stuffed into the drill holes. Subsequently, these
sausage forms are each compressed with a stick, the diameter of which corresponds approximately to that
of the drill hole diameter.

Benefits of Betonamit

Technical Notices

> Only use drills with a diameter between 30mm and 40mm.
> The drill holes should be as clean and dry as possible.
> The minimum drill hole depth corresponds to 5 times the drill hole diameter.
> The maximum fillable drill hole depth is about 3 to 5 metres



DEMOLITION TIME TABLE

► Drill hole diameter 40mm

  Ambient temperature 5 C° 10 C° 15 C° 20 C° 25 C° 30 C° 35 C°
  Water temperature 25 C° 25 C° 20 C° 20 C° 20 C° 20 C° 20 C°
  Drill Hole Spacing 40cm 40cm 40cm 40cm 40cm 40cm 40cm
  Demolition Time 10-24 h 10-18 h 8-16 h 6-14 h 6-10 h 4-8 h 2-8 h

Drill hole diameter 30mm

  Ambient temperature 5 C° 10 C° 15 C° 20 C° 25 C° 30 C° 35 C°
  Water temperature 25 C° 25 C° 20 C° 20 C° 20 C° 20 C° 20 C°
  Drill Hole Spacing 30cm 30cm 30cm 30cm 30cm 30cm 30cm
  Demolition Time 12-36 h 12-24 h 8-16 h 8-16 h 6-12 h 6-10 h 4-8 h

Tip! Betonamit continues to expand over several days. This means that the more time you give Betonamit to work, the easier the subsequent removal of the fragments will be. So, have some patience and let Betonamit do the really hard work for you.





More detail about Kyusen Machinery Enterprise
Kyusen Machinery Enterprise
Kyusen Machinery Enterprise Machinery Supplier Selangor, Malaysia, Power Tools Supply Kuala Lumpur (KL), Industrial Equipment Supplies ~ Kyusen Machinery Enterprise
Contact Us flagMalaysia