2/2 solenoid valves
Servo-controlled
Normally closed
Application range:>
The 2/2-way solenoid valves of the 40 series are servo-controlled, i.e. they require a minimum differential pressure of 0.3 bar.
Typical fields of application of these valves are the sanitary technology, but these valves can also be used in general machinery and plant engineering. Any mounting position is possible, but preferably with upright solenoids! Type of protection IP 65.
Delivered with connector plug.
Solenoid coil 182
The solenoid coil 182 complies with VDE 0580.
Power consumption: approx. 14.5 / 10.5 VA
Use of solenoid coils in fluid temperature +90°C and ambient temperature +35°C.
Duty factor: 100%
Operating voltage range: +5 / -10%
Possible coil voltages:
24 V =, 24 V, 42 V, 230 V (50 Hz + 60 Hz)
Also available as ex-protected version and normally open.
Features:>
Kv-value: 3.3 m³/h
Pressure: 0.3 - 20 bar
Voltage: 230 V
Connection: 3/8"
Seal material: NBR
Fluids: air, water, neutral gases
temperature: -10 - +90°C
Ambient temperature: -10°C / +35°C
Viscosity: max. 22 mm²/s-1
Burst pressure: > 60 bar