Proton Cvt Exora Preve Flx VT2 VT3 Auto Gearbox Transmission Valve Body

The Proton Exora, Preve, and FLX models, which utilize the CVT (Continuously Variable Transmission), rely on the transmission valve body for proper gear shifting, fluid routing, and hydraulic control. The VT2 and VT3 designations refer to specific versions of the CVT transmission, and the valve body plays a crucial role in controlling the continuous gear ratios and fluid pressure necessary for smooth operation.

What is the Valve Body in a CVT?

The valve body in a CVT is a critical component responsible for controlling the hydraulic pressure and directing transmission fluid to the right places, which allows the gears (or belt/chain system) to adjust seamlessly to different driving conditions. In CVTs, there are no traditional gears but instead a system of pulleys and a belt or chain that adjusts its diameter to provide an infinite number of ratios.

The valve body directs the fluid flow to engage or disengage these pulleys and manage the variator, which is the system that adjusts the belt's position to vary the gear ratio.

Functions of the Valve Body in a CVT

1. Hydraulic Control:
   • Directs fluid to various solenoids and actuators that adjust the variator’s pulley sizes, controlling the transmission ratio.
2. Shift Control:
   • Regulates the transition between different ratios by controlling hydraulic pressure, ensuring smooth acceleration and deceleration.
3. Clutch Control:
   • Manages the application of the clutches in the CVT, controlling the engagement of the belt or chain.
4. Torque Transfer:
   • Ensures the right amount of torque is transferred to the wheels by modulating fluid pressure.

Symptoms of Valve Body Issues in a CVT

A faulty valve body can lead to various performance problems. Common symptoms of valve body failure include:

• Slipping or Jerky Shifting:
  • The CVT may struggle to smoothly transition between ratios, leading to hesitation, lurching, or jerky movements.
• Unusual Noises:
  • Grinding, whining, or clattering sounds coming from the transmission, indicating poor fluid control or internal wear.
• Erratic Acceleration:
  • The vehicle may accelerate unevenly, as the variator struggles to adjust the gear ratio.
• Overheating:
  • Inadequate fluid pressure control can lead to transmission overheating.
• Warning Lights:
  • The Check Engine or Transmission Warning Light may illuminate, and diagnostic trouble codes (DTCs) could point to issues with hydraulic pressure or solenoid malfunction.
• No Movement in Gear:
  • The vehicle may not move at all or may only move in certain conditions due to lack of proper hydraulic engagement.

Diagnosing Valve Body Problems

To diagnose and confirm if the valve body is the issue, the following methods are used:

1. Diagnostic Trouble Codes (DTCs):
   • Use an OBD-II scanner to check for transmission-related fault codes (e.g., P0840, P0841 for pressure sensor issues).
2. Fluid Pressure Testing:
   • A mechanic may test the fluid pressure at various points in the valve body using specialized equipment to identify leaks or weak pressure.
3. Visual Inspection:
   • If accessible, the valve body can be inspected for signs of fluid leaks or physical damage.
4. Solenoid Testing:
   • The solenoids connected to the valve body can be tested to ensure they are operating correctly.

Replacing the Valve Body

If the valve body is determined to be the cause of the issue, replacement is necessary. Here is a general procedure for replacing the valve body in the CVT of a Proton Exora, Preve, or FLX:

Tools and Parts Needed:

• New or remanufactured valve body (specific to your Proton model, possibly with part numbers like VT2 or VT3).
• Gaskets or seals.
• Transmission fluid (CVT-specific fluid for Proton models).
• Basic hand tools (socket set, torque wrench, screwdrivers).

Procedure:

1. Prepare the Vehicle:

   • Disconnect the vehicle battery to prevent electrical issues during disassembly.
   • Lift the vehicle to access the transmission (if necessary).

2. Drain the Transmission Fluid:

   • Remove the transmission fluid by draining it from the pan. Collect the fluid in a clean container for disposal or inspection.

3. Remove the Transmission Pan:

   • Unbolt the transmission pan, which may require removal of bolts or fasteners. This will expose the valve body.

4. Remove the Valve Body:

   • Carefully disconnect any electrical wiring or sensors attached to the valve body.
   • Unbolt the valve body from the transmission housing.
   • Gently remove the valve body, being cautious of any fluid or debris.

5. Inspect the Old Valve Body:

   • Check the removed valve body for damage, wear, or clogging in the fluid passages.

6. Install the New Valve Body:

   • Place the new valve body into position and secure it with bolts, ensuring it is torqued to the manufacturer's specifications.
   • Reconnect any wiring and sensors, ensuring proper connections.

7. Reassemble the Transmission:

   • Install the transmission pan with a new gasket, ensuring a proper seal.
   • Refill the transmission with the appropriate CVT fluid.

8. Program and Test:

   • Use a diagnostic scanner to check for any stored codes and reset the transmission control unit (TCU).
   • Perform a test drive to ensure smooth shifting and proper operation.

Preventive Maintenance for CVT Valve Body

To avoid premature failure of the valve body and ensure long-term reliability:

• Regular Fluid Changes:
  • Change the CVT fluid at intervals specified by the manufacturer, typically every 40,000–60,000 km.
• Proper Fluid Levels:
  • Always maintain the correct fluid level to avoid over- or under-filling, which can damage the valve body.
• Avoid Overheating:
  • Ensure the transmission cooling system is functioning properly to prevent excessive temperatures.

Common Fault Codes Related to Valve Body

• P0840: Transmission Fluid Pressure Sensor Circuit – Range/Performance Problem.
• P0841: Transmission Fluid Pressure Sensor Circuit – Low Voltage.
• P0897: Transmission Fluid Pressure Low.

Conclusion

The valve body in the CVT of the Proton Exora, Preve, FLX (VT2/VT3) plays an essential role in managing hydraulic pressure and ensuring smooth shifting. If you experience symptoms of valve body failure, a professional diagnostic is necessary to pinpoint the issue. Replacing the valve body, while challenging, can restore the vehicle’s transmission performance.

Let me know if you need further details, part numbers, or assistance with this repair!