Description
50-75mm Bearing Separator ID777797
Bearing Separator 50-75mm
Designed for removing bearings where there is access behind the bearing
Edges of knife-like design allow removing hard-to-grip parts easily
Bearing Separator has wedge shaped edges for placing puller behind hard to reach bearings, gears, etc., where clearance prevents direct application of grip puller arms.
To use with:
The Bearing Separator should be used with the Cross Bearing Puller.
Bearing separator tools are used with bar puller and legs for a wide variety of pulling jobs.
Pull-out the bearing with the H-type beam and bolts.
Each bearing separator may be used separately or in a combination with a puller.
Applies even pressure for smooth bearing separation and removes gears from the shaft without damage.
Model: ( 50mm x 75mm / 2-1/4'' ~ 3-1/2'' )
Bolt: 12.7mm x L 135mm x 1/2'' x 20UNF
Body Thread: 3/8'' x 16 UNC
*There are options for walk-in purchases.
*We always try to keep the item in stock all the time.
*Knight Auto is the real owner of the above image.
=========================================
Contact Information:
Balakong:
016-6616801(whatsapp)
603-89623888
603-89617328
Setapak:
603-40219399
Gombak:
603-40318686(whatsapp)
Titiwangsa:
603-40319292
Kajang:
016-6613186(whatsapp) Tel:017-3691038
Knight Auto Sdn Bhd (Since 1999)(476359-M)
A Wholly-Owned Subsidiary of Lim Seong Hai Capital Berhad
http://www.knightauto.com.my
=========================================
More detail about Knight Auto Sdn Bhd
Malaysia
