Description
Description
SNAP Vacuum Controller | Simple, Nimble, Automatic Process Controller with up to 10 Recipes
SNAP Vacuum Controller provides precise measurement, control and venting in one integrated solution. This Automated Process Controller ideal for vacuum ovens, TVAC, Drying Powders, API and more!
New features: Faster Venting with external valve, More steps per recipe (now 24) for evacuation purge cycles, and PLC control with Analog output
SNAP: Automatic Vacuum Process Controller | Vacuum control and venting with the touch of a button or twist of a dial
-
Vent your vacuum chamber or equalize your system with the touch of a button instead of pulling hoses or turning valves
-
Treat material in chamber more gently by implementing kinder ramp rate controls which is ideal for freeze drying, vacuum drying or lyophilization applications
-
Vacuum Controller with onboard ramp rate recipe control. Allows you to program up to 10 recipes with up to 24 steps in each recipe based on time and pressure setpoints.
-
Dashboard pushbutton control for START, STOP functionality for each channel allows you to automatically vent or isolate your system with a push of a button
Ideal for automating and simplifying vacuum chamber pressure control.
-
Vacuum Flange: KF25
-
Measurement Range: 1 Torr to 775 Torr (standard)
-
Control Range: 2 Torr to 760 Torr
-
Integrated Sensor: Isolated Piezo sensor
-
Need millitorr range?: SNAP has a RJ45 Port for adding an additional sensor to extend the measurement range. We recommend the addition of the DCP Quantum to be able to monitor and control from 0.01 Torr to 1000 Torr.
Precise Flow and Process Control
SIMPLE – SIMPLIFY YOUR LAB & CONTROL MORE WITH LESS
-
Applications: vacuum chamber (from 1 liter to 1000 liters) research, vacuum ovens/vacuum drying, vacuum furnaces, large scale food processing, microwave drying, composites, rotary evaporators, falling film systems
-
Fine control of target vacuum pressure for more precise processing and research
-
Enables using reliable and long lasting rotary vane pumps & dry scroll pumps in applications where diaphragm
pumps were previously required
-
Keeps vacuum pumps near their base pressure resulting in greater longevity
NIMBLE – MAXIMIZES THROUGHPUT & PUMPDOWN SPEED
-
Largest flow paths available to insure maximum flow for faster evaporation
-
Maximize throughput and pump down speed with a 20 mm vacuum path (almost full KF25 orifice)
AUTOMATIC PROCESS – PRECISION CONTROL & INTUITIVE DESIGN
-
Automatic Vacuum Process Controller | precise automated control with programmable recipes and graphing of vacuum levels
-
Innovative valve control performs both proportional throttle and bleed vacuum control (vent to atmosphere)
-
The integrated bleed design allows you to quickly vent to atmosphere to stop bumping during processing
-
Numerical readings right on the LCD screen and one touch buttons: VENT, CLOSE (isolate, close all valves) and FULL VAC (fully opens the valve for vacuum pump and closes the vent valve)
-
Analog out, 0-10 volts DC Analog in
-
Onboard Recipe Control: The SNAP can have up to 24 individual steps in the recipe screen, time (minutes or seconds) in any step can be up to 999 minutes in duration. We can ramp or hold….Ramp is work our way up to the setpoint gradually, hold is just “get there” and stay.
SNAP Vacuum Controller Wetted Material:
-
Viton
-
304SS
-
316SS
-
PTFE 567
External Valve Option
The Time-Based Vacuum Differential Control is a sophisticated functionality integrated into the SNAP vacuum controller, designed to optimize vacuum control performance by dynamically regulating an external valve based on vacuum differentials (VD) within predefined time intervals (VDW). This feature enhances process efficiency by ensuring that the vacuum level reaches the setpoint within the specified time.
Operational Mechanics:
When configured, the Time-Based Vacuum Differential Control continuously monitors the vacuum level against the user-defined setpoint. If the desired vacuum level is not attained within the specified time, the controller triggers the external valve to open. The valve modulation is performed with precision to achieve the desired vacuum level efficiently.
Configuration:
Users can access the Time-Based Vacuum Differential Control settings through DVCUP. Configuration involves setting two primary parameters.
-
Time Interval (VDW): Define the time interval within which the vacuum should reach the setpoint.
-
Vacuum Differential Threshold (VD): Specify the allowable vacuum differential from the setpoint within the defined time.
VDW is defined in seconds, while VD is defined in Torr.
If the vacuum level is not within VD torr of the user inputted setpoint within the time interval of VDW, the external valve opens up.
Example:
VD: 10
VDW: 10
The controller triggers the external valve to open so the system can vent more quickly to the next setpoint.
DVCUP Example:
Here is an example of the SNAP connected using DVCUP. The commands for the variables are as follows.
To query the current value:
VD?
VDW?
To assign a new value:
VD=(x) in Torr
VDW=(x) in seconds
DVCUP will not echo the command; it will only display the response.
Product Demonstration Videos
SNAP Controller Hardware
SNAP Controller Software
Technical Specifications
Range of Control: 2 Torr to 760 Torr
Accuracy/ Control:+/- 5% of reading
Time to Convergence Within 5% after disturbance: <30 seconds
Integral Sensor: Isolated Piezo sensor | SEN-775i
-
Integral Sensor Accuracy:+/- 2 Torr
-
Integral Sensor range: 1-775 Torr
-
Integral Sensor wetted materials: 316 Stainless steel, Isolated
Vacuum Path Orifice: Minimum orifice of 20 mm
Minimum Bleed Valve Orifice: 10 mm
Set-Points: Quickly dial in set-points with control knob, START, STOP, Vent or Isolate the System
Vacuum Fittings: KF25 (NW25)
Power: Auto sensing 110 V / 220 V 50/60 Hz power supply
Novel Vacuum Control: proportional throttle and proportional bleed control (vent to atmosphere) delivered from an integral dual valve module
Output: Ability to be controlled remotely via USB for integration into larger system; RS232 is also an option for output
Hardware output: (0V -10V) Analog out, analog in to control
Software Output: rs232/ USB for integration
Recipes: Ramp Vacuum Controller: Program ramps and holds vacuum at different a duration and vacuum level
Enclosure: 12″ deep x 10.25″ wide x 5.25″ high
Weight: SS; 13 pounds, Al; 9 pounds
Certifications: Built to CE standards, RoHS
Calibration Services
All vacuum instruments that leave the DigiVac factory are calibrated under real vacuum against a NIST standard. If you would like to have your SNAP Vacuum Controller Calibration Information please add either of the following items to your cart.
-
NIST Calibration
-
Vacuum Gauge or Vacuum Controller NIST Calibration with traceable data, which ensures that vacuum measurement readings are accurate. NIST calibration is recommended on an annual basis.
-
NIST calibration involves using a higher accuracy vacuum gauge calibrated by an A2LA certified lab to the vacuum gauge being tested.
-
Calibration without Documentation
-
Controller or Gauge Calibration without Data (no documentation is provided). DigiVac recommends yearly calibration of your vacuum gauge or controller.
More detail about Hexo Industries (M) Sdn Bhd
Malaysia
