Description
Advantages of New Twin Rail Slide System ''Heavy Duty'' over machines with old dovetail system.
- Up to 10 times better stability
- Extremely tight tolerances of the slide through the round Twin Rail System
- The slide has no contact with the main body of the machine. The whole construction is connected only by the highly precise and extremely stable rail system
- Reduced friction / less wear
- Low maintenance / better reliabilty
Result
- Improved cutter life
- Reduced cutter breakage
- Improved ole tolerances
- Improved hole surface quality
- Up to 110mm cutting depth possible already with small machines
The new MAG-TEC Sensor
The sensor detect how well the magnet keeps the machines on the ground.
- It is directly connected to the engine.
- If the sensor is illuminating ''RED'', the ground is dirty (rust, varnish residues, chips),the material is thinner than 6 mm or the feed rate is to high
- The machines does not have a safe stand. The engine does not start or turns off
- If the sensor is illuminating ''Green'', the magnetic holding force is optimal and the use of the machine is safe
| Model |
KATV 100 BLUE-MAG |
| Motor Power Watts |
1800 W |
| Tool Holder |
Morse Tape 3 Weldon 19 mm (3/4'') |
| Coolant Supply |
Internal, Automatic |
| Stroke |
255 mm 10.15/64'' |
| Voltage |
230V / 100V |
| Magnetic Adhesion |
2050kg / 24520lb |
| Magnetic Foot |
85 x 180mm Starr Fixed |
| Core Drilling |
12 - 100 mm (15/32'' - 3.15/16'') |
| Twist Drilling |
3 - 32 mm (3/16'' - 1.17/64'') |
| Countersinking |
6 - 32 mm (15/64'' - 1.17/64'') |
| Weight |
20.50 kg, 45.00 lb |
More detail about LEEDEN HERCULES SDN BHD
Malaysia
