FUJI ELECTRIC Alpha 5 Smart Series Servo Motor

Description

Standard Specifications:*1 The load inertia ratio to the inertia of servo motor. If the moment of load inertia ratio value exceeds the list value, please contact us.
*2 If the motor is used in the environment rated to IP67 protection degree, use the wiring connector suitable for the protection degree.

Brake specifications (motor equipped with a brake)

Torque characteristics diagrams (at 3-phase 200 [V] or single-phase 230 [V] source voltage)

These characteristics indicate typical values of each servomotor combined with the corresponding servo amplifier RYH series.
The rated torque indicates the value obtained when the servo amplifier is installed to the following aluminum heat sink.

• Model GYG501C, 751C, 102C : 300 ×300 ×12 [mm]

• Model GYG152C, 202C : 400 ×400 ×12 [mm]

• Model GYG501B, 851B : 300 ×300 ×12 [mm]

• Model GYG132B : 400 ×400 ×12 [mm]

External Dimensions:
1. Middle Inertia GYG Motor [2000r/min]

Encoder type R：INC(20bit)，H：ABS(18bit)

2. Middle Inertia GYG Motor [2000r/min] (With Brake)

Encoder type R：INC(20bit)，H：ABS(18bit)

3. Middle Inertia GYG Motor [1500r/min]

Encoder type R：INC(20bit)，H：ABS(18bit)

4. Middle Inertia GYG Motor [1500r/min] (With Brake)

Encoder type R：INC(20bit)，H：ABS(18bit)
 

More detail about POWER DRIVE TECHNOLOGY SDN. BHD.